Quick Answer How do you grease a U‑joint correctly? Clean the zerk fitting. Use a manual grease gun with NLGI Grade 2 lithium‑complex EP grease (ASTM D4950 LB). Pump slowly...
Read More →
Quick Answer: Replace a U-joint by removing the drive shaft, pressing out the old joint, cleaning the yokes, pressing in the new joint with a press tool or vise, and...
Read More →
Quick Answer Driving with a bad tensioner pulley causes belt slippage, misalignment, or breakage. This disables the alternator, water pump, and power steering pump. The engine may overheat, the battery...
Read More →
Quick Answer The tensioner pulley is mounted on the spring‑loaded tensioner arm. To locate it, find the serpentine belt and look for the pulley attached to the movable arm, which...
Read More →
Quick Answer: The idler pulley is located at the front of the engine, somewhere along the serpentine belt path. To find it, look for a pulley that is not connected...
Read More →
