Wheel Hub VKBA7608
The DUHUI Bearing VKBA7608 wheel hub is a rear axle hub assembly engineered for Nissan Tiida hatchback and sedan models from 2004 through 2013. This rear wheel hub bearing matches OE references including 43202-EE500, 43202-EL000, and 43202-EL00A. It features an integrated ABS sensor, a 148.00 mm flange diameter, and a 4-hole rim pattern, designed for direct replacement on the C11 and SC11 platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0430 |
| Part Number | VKBA7608 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Hub Unit |
| Flange Diameter | 148.00 mm (5.827 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | Integrated Sensor |
| Weight | 2.94 kg (6.48 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0430
OE Numbers: 43202-EE500, 43202-EL000, 43202-EL00A, 43202-1J60A
Reference Numbers (Interchange):
SKF: VKBA 7608
FAG: 713 6139 90
SNR: R168.78
NTN: HUB171T-1
MOOG: 512386
OPTIMAL: 962206
NIPPARTS: N4711071
FEBEST: 0282-C11R
BRTEC: 993328
Vehicle Fitment
NISSAN: Tiida Hatchback (C11) (2004-2013) 1.6, 1.8, 1.5 dCi; Tiida Saloon (SC11) (2004-2013) 1.6, 1.8, 1.5 dCi
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub unit with integrated ABS sensor for Nissan Tiida C11 and SC11 models equipped with anti-lock braking systems.
- Matches Nissan OE numbers 43202-EE500, 43202-EL000, 43202-EL00A, and 43202-1J60A for direct replacement.
- 4-hole rim pattern with 148.00 mm flange diameter matches the original mounting configuration on Tiida rear axles.
- Pre-assembled hub unit simplifies installation and eliminates the need for separate bearing pressing.
- Cross-references to SKF VKBA 7608, SNR R168.78, FAG 713 6139 90, and NTN HUB171T-1 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Nissan Tiida (C11/SC11) models equipped with ABS.
- Confirm the 4-hole rim pattern and 148.00 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new hub unit.
- Torque the axle nut and wheel bolts to Nissan service manual specifications for the C11 platform.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
