Wheel Hub VKBA7540
The DUHUI Bearing VKBA7540 wheel hub is a direct OE-replacement assembly designed for Honda Accord Sedan and Station Wagon models from 2008 through 2012 and Acura TSX models from 2009 through 2014. This rear wheel hub bearing matches OE references including 42200-TA0-A51, 42200-TC0-T51, and 42200-TL0-G51. It features a Gen 3 hub unit design with 5 wheel studs, a 139.50 mm flange diameter, and an integrated ABS sensor, engineered for rear axle applications on these sedan and wagon platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0416 |
| Part Number | VKBA7540 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 139.50 mm (5.492 inch) |
| Flange Offset | 59.06 mm (2.325 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 64.00 mm (2.520 inch) |
| Brake Pilot Diameter | 64.00 mm (2.520 inch) |
| Hub Pilot Diameter | 72.00 mm (2.835 inch) |
| Hub Bolt Circle Diameter | 101.60 mm (4.000 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Hole Size | M12 x 1.25 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0416
OE Numbers: 42200-TA0-A51, 42200-TC0-T51, 42200-TL0-G51, 42200-TA0-A52, 42200-TL0-G52
Reference Numbers (Interchange):
SKF: VKBA7540
SKF: BR930763
SNR: R174.98
Timken: HA590343
Timken: 512353
NTN: HUB291-19
FAG: 713627020
BCA: 512353
MOOG: 512353
GMB: 735-0368
Mevotech: H512353
GSP: 9232028
Optimal: 962716
Kavo Parts: WBH6513
Blueprint: ADH28551
Febest: 0482-CU2R
Vehicle Fitment
HONDA: Accord Sedan (CP, CS) (2008-2012) L4 2.4L, V6 3.5L, Accord Station Wagon (CW) (2008-2012), Accord Crosstour (2010-2012)
ACURA: TSX (2009-2014) L4 2.4L, TSX Sport Wagon (2011-2014)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing, flange, and ABS sensor into one pre-assembled unit for simplified rear axle installation on Honda Accord CP and Acura TSX platforms.
- Integrated ABS sensor ensures proper speed signal transmission for vehicles equipped with anti-lock braking systems.
- 139.50 mm flange diameter with 5-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Accord and TSX rear axles.
- 72.00 mm hub pilot diameter and 64.00 mm wheel pilot diameter ensure proper wheel centering.
- 5 wheel studs with M12 x 1.5 thread and 4 flange bolt holes with M12 x 1.25 thread ensure secure mounting.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930763, SNR R174.98, Timken HA590343, and NTN HUB291-19 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Accord Sedan (2008-2012), Accord Station Wagon (2008-2012), Accord Crosstour (2010-2012), and Acura TSX (2009-2014) models with rear ABS.
- Confirm the 5-stud wheel pattern and 139.50 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and M12 x 1.25 flange bolts to Honda service manual specifications for the respective platform.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
