Wheel Hub VKBA7497
The DUHUI Bearing VKBA7497 wheel hub is a direct OE-replacement assembly designed for Toyota Hiace fourth-generation Bus (_H1_, _H2_) models from 1995 onward, including Hiace Van and Commuter variants. This front wheel hub bearing matches OE references including 43560-26010 and 90369-53001. It features a sealed ball bearing design with an 84.00 mm outer diameter, a 53.00 mm inner diameter, and a 59.00 mm height, engineered for front axle applications on these commercial van and bus platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0412 |
| Part Number | VKBA7497 |
| Position | Front Axle (Left, Right) |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 53.00 mm (2.087 inch) |
| Outer Diameter | 84.00 mm (3.307 inch) |
| Height | 59.00 mm (2.323 inch) |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0412
OE Numbers: 43560-26010, 90369-53001, 90369-53002, 43560-26011
Reference Numbers (Interchange):
SKF: VKBA7497
SKF: VKBA 7497
SNR: 981846
Optimal: 6989
Nipparts: N4702046
Japanparts: KK-22062
Blueprint: ADT38228
Febest: 0182-H1F
Kavo Parts: WBH-9005
NSK: 53BWKH01
KOYO: DAC5384
Timken: 32886
BTA: 32886
Vehicle Fitment
TOYOTA: Hiace IV Bus (_H1_, _H2_) (1995-2006) 2.4, 2.5 D-4D, 2.7, 3.0 D, Hiace IV Van (_H1_, _H2_) (1995-2006), Hiace Commuter (1995-2006), Hiace Regius (1997-2004), HiAce SBV (1995-2004)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Sealed angular ball bearing design for front axle installation on Toyota Hiace H1 and H2 platforms.
- Non-ABS design for vehicles without front anti-lock braking systems at the hub.
- 84.00 mm outer diameter, 53.00 mm inner diameter, and 59.00 mm height match the original bearing envelope on Hiace front axles.
- Heavy-duty design engineered for the demands of commercial van and bus applications.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA7497, SNR 981846, Optimal 6989, and Nipparts N4702046 ensure accurate replacement sourcing.
Installation Notes
- This bearing is for front axle applications on Toyota Hiace IV Bus and Van (_H1_, _H2_) (1995-2006), Hiace Commuter, Hiace Regius (1997-2004), and HiAce SBV (1995-2004) models.
- Confirm the 84.00 mm outer diameter and 53.00 mm inner diameter match your vehicle axle and hub housing.
- Clean the axle spindle and hub housing thoroughly before installation.
- This bearing is pressed into the front hub. Apply pressure to the outer race only during installation. Do not press on the inner race.
- Torque the axle nut to Toyota service manual specifications for the Hiace platform.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
