Wheel Hub VKBA7441
The DUHUI Bearing VKBA7441 wheel hub is a rear axle hub assembly engineered for Honda CR-V III (RE), Accord VIII (CU), and Acura RDX models from 2006 through 2018. This rear wheel hub bearing matches OE references including 42200-STK-951, 42200-SWN-P01, and 42200-SZP-951, with cross-references to SKF VKBA 7441, FAG 713617900, and SNR R174.67. It features an integrated ABS sensor, a 152.00 mm flange diameter, and a 5-hole rim pattern, designed for direct replacement on these Honda and Acura platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0401 |
| Part Number | VKBA7441 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Generation | Gen 3 Hub Assembly |
| Outer Diameter 1 | 152.00 mm (5.984 inch) |
| Outer Diameter 2 | 82.00 mm (3.228 inch) |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Width | 87.00 mm (3.425 inch) |
| Flange Diameter | 152.00 mm (5.984 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Flange Offset | 61.40 mm (2.417 inch) |
| Rim Hole Number | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Size | M12 x 1.25 |
| ABS Sensor | Integrated Sensor Ring |
| Number of Splines | 28 |
| Weight | 3.22 kg (7.10 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0401
OE Numbers: 42200-STK-951, 42200-SWN-P01, 42200-SZP-951, 42200-SJL-951, 42200-TP7-A01, 42200-TP7-A02
Reference Numbers (Interchange):
SKF: VKBA 7441
FAG: 713 6179 00
SNR: R174.67
NTN: HUB146T
NSK: 57BWKH02
MOOG: 512344
TIMKEN: HA590204
BCA: WE60506
OPTIMAL: 912725
BLUE PRINT: ADH28350C
HERTH+BUSS JAKOPARTS: J4714058
NIPPARTS: N4714055
FEBI BILSTEIN: 173434
NK: 762637
GSP: 9328002K
Vehicle Fitment
HONDA: CR-V III (RE) (2006-2012) 2.0 i-VTEC (RE5, RE2), 2.2 i-CTDi 4WD (RE6), 2.4 4WD (RE4); CR-V IV (RM) (2012-2018) 2.0, 2.4; Accord VIII (CU) (2008-2015) 2.0, 2.4; Accord VIII Tourer (CW) (2008-2015) 2.0, 2.4; Accord Crosstour (TF) (2009-2012)
ACURA: RDX (2006-2012) 2.3 Turbo (TB1); RDX (2017-2018) 2.0 Turbo AWD
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit with integrated ABS sensor ring for Honda CR-V III/IV, Accord VIII, and Acura RDX models equipped with anti-lock braking systems.
- Matches Honda and Acura OE numbers 42200-STK-951, 42200-SWN-P01, 42200-SZP-951, and 42200-SJL-951 for direct replacement.
- 152.00 mm flange diameter with 5-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on these rear axles.
- Kit includes bearing and axle nut for complete installation. Gen 3 hub unit design simplifies fitment and eliminates bearing pressing.
- Cross-references to SKF VKBA 7441, FAG 713617900, SNR R174.67, and NTN HUB146T simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Honda CR-V III (RE) (2006-2012), CR-V IV (RM) (2012-2018), Accord VIII (CU) (2008-2015), Accord Crosstour (TF) (2009-2012), and Acura RDX (2006-2012, 2017-2018) models equipped with ABS.
- Confirm the 5-hole rim pattern and 152.00 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new hub unit. Any contamination can cause misalignment or runout.
- Torque the axle nut to 216 Nm (159 lb-ft) for CR-V and RDX applications. Use a new axle nut included in the kit.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated sensor ring.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
