Wheel Hub VKBA7412
The DUHUI Bearing VKBA7412 wheel hub is a direct OE-replacement assembly designed for Mitsubishi Pajero IV (V8_W, V9_W) models from 2006 through 2021, including Montero and Shogun variants. This front wheel hub bearing matches OE references including 3880A015, 3885A014, and 52KWH01. It features a Gen 3 hub unit design with 6 wheel studs, a 169.00 mm flange diameter, and an integrated ABS sensor, engineered for front axle applications on these full-size SUV platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0392 |
| Part Number | VKBA7412 |
| Position | Front Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing, Double Row |
| Inner Diameter | 52.00 mm (2.047 inch) |
| Outer Diameter | 91.00 mm (3.583 inch) |
| Flange Diameter | 169.00 mm (6.654 inch) |
| Width | 56.60 mm (2.228 inch) |
| Bolt Pattern | 6 x 139.7 mm |
| Wheel Stud Quantity | 6 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0392
OE Numbers: 3880A015, 3885A014, 3880A4015, 52KWH01
Reference Numbers (Interchange):
SKF: VKBA7412
FAG: 713619850
SNR: R173.61
NSK: 52KWH01
Optimal: 951744
Blue Print: ADC48254
Febest: 0482-V97F
Japanparts: KK15018
Nipparts: N4705026
Herth+Buss: J4705035
Mapco: 26737
Meyle: 32-14 652 0000
Vehicle Fitment
MITSUBISHI: Pajero IV (V8_W, V9_W) (2006-2021) 3.0 V6, 3.2 DI-D, 3.8 V6, Pajero IV (NS, NT, NW, NX) (2006-2021), Montero IV (2007-2021), Shogun IV (2007-2021)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing, flange, and ABS sensor into one pre-assembled unit for simplified front axle installation on Mitsubishi Pajero IV platforms.
- Integrated ABS sensor ensures proper speed signal transmission for vehicles equipped with anti-lock braking systems.
- 169.00 mm flange diameter with 6-stud wheel pattern and 139.7 mm bolt circle matches the original mounting configuration on Pajero IV front axles.
- 91.00 mm outer diameter and 52.00 mm inner diameter provide the correct bearing envelope for these full-size SUV platforms.
- Heavy-duty design engineered for the demands of 4WD and off-road vehicle applications.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA7412, FAG 713619850, SNR R173.61, and NSK 52KWH01 ensure accurate replacement sourcing.
Installation Notes
- This hub is for front axle applications on Mitsubishi Pajero IV (V8_W, V9_W) (2006-2021), Montero IV (2007-2021), and Shogun IV (2007-2021) models with front ABS.
- Confirm the 6-stud wheel pattern and 169.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the Pajero IV platform – do not use an impact wrench to avoid bearing damage.
- This kit covers one wheel; order two for a full axle replacement.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
