Wheel Hub VKBA7406
The DUHUI Bearing VKBA7406 wheel hub is a direct OE-replacement assembly designed for Mitsubishi Lancer Evolution VI, VII, VIII, and IX models from 1998 through 2007. This front wheel hub bearing matches OE references including MB914617, MR223962, and MB633276. It features a Gen 3 hub unit design with 5 wheel studs, a 139.00 mm flange diameter, and an integrated ABS ring, engineered for front axle applications on these high-performance AWD sedan platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0390 |
| Part Number | VKBA7406 |
| Position | Front Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing, Double Row |
| Inner Diameter | 27.00 mm (1.063 inch) |
| Outer Diameter | 140.00 mm (5.512 inch) |
| Width | 113.00 mm (4.449 inch) |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Rim Hole Number | 5 |
| ABS Sensor | Integrated ABS Ring |
| Weight | 4.11 kg (9.06 lbs) |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0390
OE Numbers: MB914617, MR223962, MB633276, MR223946, MR223994
Reference Numbers (Interchange):
SKF: VKBA7406
SNR: R173.53
FAG: 713619800
NTN: HUB111
KOYO: 3DACF026F21R
Timken: HA590275
BCA: 512382
MOOG: MI-WB-11918
Optimal: 951618
Herth+Buss: J4705025
Nipparts: J4705025
Meyle: 32-14 652 0000
Vehicle Fitment
MITSUBISHI: Lancer VI (CJ_, CP_) (1998-1998) Evolution VII, Lancer VII (CS_A, CT_A) (2001-2007) Evolution VII, Evolution VIII, Evolution IX, Lancer Evolution VIII (2003-2005), Lancer Evolution IX (2005-2007)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing, flange, and ABS ring into one pre-assembled unit for simplified front axle installation on Mitsubishi Lancer Evolution platforms.
- Integrated ABS ring monitors wheel speed for anti-lock braking systems.
- 139.00 mm flange diameter with 5-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Evolution front axles.
- 140.00 mm outer diameter and 113.00 mm width provide the correct bearing envelope for these high-performance AWD platforms.
- Heavy-duty design engineered for the demands of turbocharged AWD vehicles.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA7406, SNR R173.53, FAG 713619800, and NTN HUB111 ensure accurate replacement sourcing.
Installation Notes
- This hub is for front axle applications on Mitsubishi Lancer Evolution VI, VII, VIII, and IX models with front ABS.
- Confirm the 5-stud wheel pattern and 139.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and wheel bolts to Mitsubishi service manual specifications for the Evolution platform.
- Inspect the ABS ring and sensor connector for damage before installation, as this hub includes an integrated ABS ring.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
