Wheel Hub VKBA7405
The DUHUI Bearing VKBA7405 wheel hub is a direct OE-replacement assembly designed for Mitsubishi Lancer sedan and station wagon models from 2000 through 2013. This rear wheel hub bearing matches OE references including MR403730, MR527452, MR493619, and MB809577. It features a Gen 2 hub unit design with 4 wheel studs, a 138.00 mm flange diameter, and an integrated ABS sensor, engineered for rear axle applications on these compact sedan and wagon platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0389 |
| Part Number | VKBA7405 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing, Double Row |
| Flange Diameter | 138.00 mm (5.433 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 67.00 mm (2.638 inch) |
| Brake Pilot Diameter | 90.17 mm (3.550 inch) |
| Hub Pilot Diameter | 68.58 mm (2.700 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0389
OE Numbers: MR403730, MR527452, MR493619, MB809577
Reference Numbers (Interchange):
SKF: VKBA7405
SKF: BR930448
SNR: R173.49
FAG: 713640470
NTN: HUB213-22
KOYO: 3DACF026F
Timken: HA590205
BCA: 512270
MOOG: 512270
Mevotech: H512270
GMB: 735-0317
Optimal: 962611
Blueprint: ADC48340
Febest: 0482-CJ5R
Japanparts: KK-22035
Nipparts: J4715033
Vehicle Fitment
MITSUBISHI: Lancer Sedan (CS_A, CT_A) (2000-2013) 1.3, 1.6, 1.8, 2.0, Lancer Station Wagon (CS_W, CT_W) (2003-2008) 1.6, 1.8, 2.0, Lancer Cedia (2000-2007)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Mitsubishi Lancer CS and CT platforms.
- Integrated ABS sensor ensures proper speed signal transmission for vehicles equipped with anti-lock braking systems.
- 138.00 mm flange diameter with 4-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Lancer sedan and wagon rear axles.
- 67.00 mm wheel pilot diameter and 90.17 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA7405, SNR R173.49, FAG 713640470, and NTN HUB213-22 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Mitsubishi Lancer Sedan (2000-2013), Lancer Station Wagon (2003-2008), and Lancer Cedia (2000-2007) models with rear ABS.
- Confirm the 4-stud wheel pattern and 138.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Mitsubishi service manual specifications for the Lancer CS/CT platform.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
