Wheel Hub VKBA7403
The DUHUI Bearing VKBA7403 wheel hub is a direct OE-replacement assembly designed for Nissan Pathfinder (R51) models from 2005 through 2012 and Nissan Navara (D40) models from 2005 through 2015. This rear wheel hub bearing matches OE references including 43202-4X00A, 43202-EA500, and 43202-ZP80A. It features a Gen 1 hub unit design with 6 wheel studs, a 148.00 mm flange diameter, and a 32-spline driven hub, engineered for rear axle applications on these SUV and pickup platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0388 |
| Part Number | VKBA7403 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 1 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 148.00 mm (5.827 inch) |
| Flange Offset | 69.00 mm (2.717 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Hub Pilot Diameter | 89.00 mm (3.504 inch) |
| Hub Bolt Circle Diameter | 114.00 mm (4.488 inch) |
| Brake Pilot Diameter | 67.95 mm (2.675 inch) |
| Wheel Stud Quantity | 6 |
| Flange Bolt Hole Size | M12 x 1.25 |
| Spline Count | 32 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0388
OE Numbers: 43202-4X00A, 43202-EA500, 43202-ZP80A, 43202-EA50A
Reference Numbers (Interchange):
SKF: VKBA7403
FAG: 713613950
SNR: R168.87
Timken: HA590284
NTN: HUB124
KOYO: DACF1090
BCA: 512402
MOOG: 512402
Mevotech: H512402
GMB: 770-0334
Optimal: 962720
Blueprint: ADN18373
Febest: 0282-R51R
Japanparts: KK-22038
Nipparts: J4711075
Vehicle Fitment
NISSAN: Pathfinder III (R51) (2005-2012) 2.5 dCi, 4.0, Navara (D40) (2005-2015) 2.5 dCi, 4.0, Frontier (D40) (2005-2015), Xterra (N50) (2005-2015), Armada (TA60) (2004-2015)
SUZUKI: Equator (2009-2012)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 1 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Nissan R51 and D40 platforms.
- 32-spline driven hub design matches the original driveshaft engagement for these SUV and pickup applications.
- 148.00 mm flange diameter with 6-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Pathfinder and Navara rear axles.
- 89.00 mm hub pilot diameter and 67.95 mm brake pilot diameter ensure proper wheel and brake component alignment.
- Non-ABS design for vehicles without rear wheel speed sensor integration at the hub.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA7403, FAG 713613950, SNR R168.87, and Timken HA590284 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Nissan Pathfinder III (R51) (2005-2012), Navara (D40) (2005-2015), Frontier (D40) (2005-2015), Xterra (N50) (2005-2015), and Armada (TA60) (2004-2015) models without rear ABS at the hub.
- Confirm the 6-stud wheel pattern and 148.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and flange bolts to Nissan service manual specifications for the respective platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly. This bearing assembly requires a press for installation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
