Wheel Hub VKBA6991
The DUHUI Bearing VKBA6991 wheel hub is a direct OE-replacement assembly designed for Honda Civic VIII (FN, FK, FD, FA) models from 2005 through 2012 and Honda Civic IX (FK, FB) models from 2011 through 2016. This rear wheel hub bearing matches OE references including 42200-SMG-G51 and 42200-SMG-G51S1. It features a Gen 3 hub unit design with 5 wheel studs, a 139.20 mm flange diameter, and an integrated 48-tooth ABS sensor ring, engineered for rear axle applications on these hatchback, sedan, and tourer platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0378 |
| Part Number | VKBA6991 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Outer Diameter | 139.20 mm (5.480 inch) |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Width | 68.20 mm (2.685 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Stud Quantity | 5 |
| ABS Sensor | Integrated ABS Sensor Ring |
| ABS Ring Teeth | 48 |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0378
OE Numbers: 42200-SMG-G51, 42200-SMG-G51S1
Reference Numbers (Interchange):
SKF: VKBA 6991
SNR: R174.70
FAG: 713 6178 90
NTN: HUB325-5
Blue Print: ADH28346
Delphi: BK1620
Nipparts: N4714054
Optimal: 912003
Kavo Parts: WBH-2041
Herth+Buss Jakoparts: J4714045
Ruville: 7456
Metelli: 19-7780
Quinton Hazell: QWB1442
A.B.S.: 201347
GSP: 9230091
Vehicle Fitment
HONDA: Civic VIII Hatchback (FN, FK) (2005-2011), Civic VIII Sedan (FD, FA) (2006-2013), Civic IX Hatchback (FK) (2012-2016), Civic IX Sedan (FB) (2011-2016), Civic IX Tourer (FK) (2014-2016)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing, flange, and ABS sensor ring into one pre-assembled unit for simplified rear axle installation on Honda Civic VIII and IX platforms.
- Integrated 48-tooth ABS sensor ring monitors wheel speed for anti-lock braking systems.
- 139.20 mm outer diameter and 68.20 mm width match the original bearing envelope on Civic VIII and IX rear axles.
- 5-stud wheel pattern with 114.30 mm bolt circle diameter matches the OEM wheel mounting configuration.
- Angular ball bearing design provides stable load distribution for rear axle applications.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA 6991, SNR R174.70, FAG 713 6178 90, and NTN HUB325-5 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Civic VIII (2005-2013) and Civic IX (2011-2016) models with rear ABS.
- Confirm the 5-stud wheel pattern and 139.20 mm outer diameter match your vehicle mounting configuration.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific Honda Civic platform. Do not use an impact wrench to tighten the axle nut.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated sensor ring.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
