Wheel Hub VKBA6940
The DUHUI Bearing VKBA6940 wheel hub is a direct OE-replacement assembly designed for Hyundai Trajet (FO) MPV models from 2000 through 2008. This rear wheel hub bearing matches OE references including 52710-3A101, 52710-3A100, and 52710-3A110. It features a Gen 2 hub unit design with 5 wheel studs, a 148.00 mm flange diameter, and an integrated ABS tone ring, engineered for rear axle applications on this MPV platform.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0361 |
| Part Number | VKBA6940 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 148.00 mm (5.827 inch) |
| Flange Offset | 51.31 mm (2.020 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 67.06 mm (2.640 inch) |
| Brake Pilot Diameter | 75.95 mm (2.990 inch) |
| Hub Pilot Diameter | 89.92 mm (3.540 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated Tone Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0361
OE Numbers: 52710-3A101, 52710-3A100, 52710-3A110, 52710-3A111
Reference Numbers (Interchange):
SKF: VKBA6940
SKF: BR930482
FAG: 713626590
SNR: R184.32
Timken: 512196
BCA: 512196
MOOG: 512196
NTN: NT512196
GMB: 735-0395
Mevotech: H512196
Raybestos: 712196
Centric: 406.51007
WJB: WA512196
Precision: 295-12196
Spidan: 27773
Vehicle Fitment
HYUNDAI: Trajet (FO) MPV (2000-2008) 2.0, 2.0 CRDi, 2.7 V6, with ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on the Hyundai Trajet FO platform.
- Integrated ABS tone ring monitors wheel speed for anti-lock braking systems.
- 148.00 mm flange diameter with 5-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on Trajet rear axles.
- 67.06 mm wheel pilot diameter and 75.95 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA6940, SKF BR930482, FAG 713626590, and SNR R184.32 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Hyundai Trajet (FO) MPV (2000-2008) models with ABS.
- Confirm the 5-stud wheel pattern and 148.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the Hyundai FO platform.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated tone ring sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
