Wheel Hub VKBA6915
The DUHUI Bearing VKBA6915 wheel hub is a direct OE-replacement assembly designed for Mitsubishi Pajero III (V60, V70) models from 2000 through 2006 and Pajero IV (V8_W, V9_W) models from 2006 onward. This rear wheel hub bearing matches OE references including MR418068, MR418524, and 3780A011. It features a Gen 1 hub unit design with 6 wheel studs, a 175.00 mm outer diameter, and a non-ABS configuration, engineered for rear axle applications on these full-size SUV platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0356 |
| Part Number | VKBA6915 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 1 Hub Assembly |
| Bearing Type | Ball Bearing |
| Inner Diameter | 48.00 mm (1.890 inch) |
| Outer Diameter | 175.00 mm (6.890 inch) |
| Height | 51.00 mm (2.008 inch) |
| Rim Hole Number | 6 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0356
OE Numbers: MR418068, MR418524, 3780A011, MF472082, 952755
Reference Numbers (Interchange):
SKF: VKBA6915
SKF: BR930461
FAG: 713619810
SNR: R173.58
NTN: HUB194-11
KOYO: DACF1090
Timken: HA590141
BCA: 512302
MOOG: 512302
GMB: 770-0308
Mevotech: H512302
Optimal: 962528
Kavo Parts: WBH6584
Febest: 0482-V73R
Japanparts: KK-22052
Nipparts: J4715055
Vehicle Fitment
MITSUBISHI: Pajero III (V60, V70) (2000-2006) 3.0 V6, 3.2 DI-D, 3.5 V6, 3.8 V6, 3.8 V6, Montero III (2000-2006), Shogun III (2000-2006)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 1 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Mitsubishi Pajero III and IV platforms.
- Non-ABS design for vehicles without rear anti-lock braking systems.
- 175.00 mm outer diameter and 48.00 mm inner diameter match the original bearing envelope on Pajero rear axles.
- 6-hole rim pattern matches the OEM wheel mounting configuration on these full-size SUV platforms.
- Heavy-duty design engineered for the demands of 4WD and off-road vehicle applications.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA6915, FAG 713619810, SNR R173.58, and NTN HUB194-11 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Mitsubishi Pajero III (V60, V70) (2000-2006) and Pajero IV (V8_W, V9_W) (2006-), including Montero and Shogun variants, without rear ABS at the hub.
- Confirm the 6-hole rim pattern and 175.00 mm outer diameter match your vehicle mounting configuration.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and hub mounting bolts to Mitsubishi service manual specifications for the Pajero platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly. This bearing assembly requires a press for installation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
