Wheel Hub VKBA6823
The DUHUI Bearing VKBA6823 wheel hub is a direct OE-replacement assembly designed for Toyota RAV4 first-generation (XA1) and second-generation (XA2) models from 1996 through 2005. This rear wheel hub bearing matches OE references including 42450-42010, 42450-42020, and 42450-42030. It features a Gen 3 hub unit design with 5 wheel studs, a 152.00 mm flange diameter, and an integrated ABS sensor, engineered for rear axle applications on these compact SUV platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0319 |
| Part Number | VKBA6823 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 151.89 mm (5.980 inch) |
| Flange Offset | 69.09 mm (2.720 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 59.94 mm (2.360 inch) |
| Brake Pilot Diameter | 61.98 mm (2.440 inch) |
| Hub Pilot Diameter | 84.07 mm (3.310 inch) |
| Hub Bolt Circle Diameter | 105.92 mm (4.170 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Size | 10.70 mm |
| Flange Bolt Hole Quantity | 4 |
| Flange Shape | Offset Trapezoid |
| ABS Sensor | Integrated Sensor |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0319
OE Numbers: 42450-42010, 42450-42020, 42450-42030, 42450-42050, 42450-44040
Reference Numbers (Interchange):
SKF: VKBA 6823
FAG: 713618830
SNR: R169.67
NTN: HUB070-16
NSK: 45BWK05
KOYO: DACF1091
TIMKEN: 512200
BCA: 512200
MOOG: 512200
GMB: 770-0265
Mevotech: H512200
Optimal: 982741
Kavo Parts: WBH-9018
Febest: 0182-ACA2R
Japanparts: KK-22045
Nipparts: J4712074
Vehicle Fitment
TOYOTA: RAV4 I (XA1) (1996-2000) 2.0, RAV4 II (XA2) (2000-2005) 1.8 VVT-i, 2.0 VVT-i, 2.0 D-4D, including FWD and 4WD variants with 4-wheel ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing, flange, and ABS sensor into one pre-assembled unit for simplified rear axle installation on Toyota RAV4 XA1 and XA2 platforms.
- Integrated ABS sensor ensures proper speed signal transmission for vehicles equipped with 4-wheel anti-lock braking systems.
- 151.89 mm flange diameter with 5-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on RAV4 rear axles.
- Offset trapezoid flange shape with 4 flange bolt holes and 10.70 mm bolt size matches the OEM attachment geometry.
- 5 wheel studs with M12 x 1.5 thread and 69.09 mm flange offset match the OEM attachment geometry.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA 6823, FAG 713618830, SNR R169.67, and NTN HUB070-16 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Toyota RAV4 (1996-2005) FWD and 4WD models with 4-wheel ABS.
- Confirm the 5-stud wheel pattern and 151.89 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and 4 flange bolts to Toyota service manual specifications for the RAV4 XA1 or XA2 platform. Do not use an impact wrench to tighten the axle nut.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
