Wheel Hub VKBA6808
The DUHUI Bearing VKBA6808 wheel hub is a rear axle hub assembly engineered for Hyundai Accent (MC) and Kia Rio II (JB) models from 2002 through 2010 without ABS. This rear wheel hub bearing matches OE references including 52750-1C000, 52750-1C002, and 52750-1G000, with cross-references to SKF VKBA 6808, FAG 713626300, and SNR R184.17. It features a 140.40 mm flange diameter, a 4-hole rim pattern, and a non-ABS bearing configuration, designed for direct replacement on these Hyundai and Kia compact car rear axles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0311 |
| Part Number | VKBA6808 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 28.00 mm (1.102 inch) |
| Outer Diameter | 140.40 mm (5.528 inch) |
| Flange Diameter | 140.40 mm (5.528 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Wheel Pilot Diameter | 54.00 mm (2.126 inch) |
| Rim Hole Number | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Not Included (Non-ABS Model) |
| Weight | 2.70 kg (5.95 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0311
OE Numbers: 52750-1C000, 52750-1C002, 52750-1G000, 52750-07000, 52750-1G100
Reference Numbers (Interchange):
SKF: VKBA 6808
FAG: 713626300
SNR: R184.17
RUVILLE: 8924
SPIDAN: 27768
HERTH+BUSS JAKOPARTS: J4710515
MOOG: HY-WB-11791
BLUE PRINT: ADG08325
OPTIMAL: 982619
NIPPARTS: N4710515
GSP: 9230069
A.B.S.: 201341
Vehicle Fitment
HYUNDAI: Accent III (MC) Saloon (2005-2010) 1.4 GL, 1.6 GLS; Accent III (MC) Hatchback (2005-2010) 1.4, 1.6; Getz (TB) (2002-2010) 1.1, 1.3, 1.4, 1.5 CRDi, 1.6 (Non-ABS Models)
KIA: Rio II (JB) Saloon (2005-2011) 1.4, 1.5 CRDi, 1.6 (Non-ABS Models); Rio II (JB) Hatchback (2005-2011) 1.4, 1.5 CRDi, 1.6 (Non-ABS Models); Picanto (BA) (2004-2011) 1.0, 1.1, 1.1 CRDi (Non-ABS Models)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit designed for Hyundai Accent III (MC), Getz (TB), and Kia Rio II (JB), Picanto (BA) models without ABS, covering the 2002 through 2011 model range.
- Matches Hyundai and Kia OE numbers 52750-1C000, 52750-1C002, 52750-1G000, and 52750-07000 for direct replacement.
- 140.40 mm flange diameter with 4-hole rim pattern and 100.00 mm bolt circle matches the original mounting configuration on these rear hubs.
- 28.00 mm inner diameter provides the correct bearing envelope for this non-ABS application.
- Cross-references to SKF VKBA 6808, FAG 713626300, SNR R184.17, and SPIDAN 27768 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Hyundai Accent III (MC) (2005-2010), Getz (TB) (2002-2010), and Kia Rio II (JB) (2005-2011), Picanto (BA) (2004-2011) models without ABS. Confirm your vehicle is non-ABS before ordering.
- Confirm the 4-hole rim pattern and 140.40 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Check for proper wheel rotation and bearing pre-load after installation. This non-ABS hub does not have a sensor connector.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
