Wheel Hub VKBA6638
The DUHUI Bearing VKBA6638 wheel hub is a rear axle hub assembly engineered for Ford Kuga I models from 2008 through 2012. This rear wheel hub bearing matches OE references including 1538604, 8V411A049AA, and 302502, with cross-references to SKF VKBA 6638, FAG 713678980, and SNR R152.78. It features a 136.00 mm flange diameter, a 5-hole rim pattern, and a non-ABS bearing configuration, designed for direct replacement on the Ford Kuga I rear axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0279 |
| Part Number | VKBA6638 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Outer Diameter | 136.00 mm (5.354 inch) |
| Flange Diameter | 136.00 mm (5.354 inch) |
| Bolt Hole Circle Diameter | 108.00 mm (4.252 inch) |
| Rim Hole Number | 5 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Not Included (Non-ABS Model) |
| Weight | 2.80 kg (6.17 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0279
OE Numbers: 1538604, 8V411A049AA, 302502, 8V41-1A049-AA
Reference Numbers (Interchange):
SKF: VKBA 6638
FAG: 713678980
SNR: R152.78
MOOG: FD-WB-11738
OPTIMAL: 302105
BLUE PRINT: ADF128303
FEBI BILSTEIN: 175518
GSP: 9400195
A.B.S.: 201277
METZGER: WM 6638
TRISCAN: 8530 16254
NK: 752544
Vehicle Fitment
FORD: Kuga I (2008-2012) 2.0 TDCi, 2.0 TDCi 4×4, 2.5 Turbo 4×4 (Non-ABS Models)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit designed for Ford Kuga I models without ABS, covering the 2008 through 2012 model range.
- Matches Ford OE numbers 1538604, 8V411A049AA, 302502, and 8V41-1A049-AA for direct replacement on the Kuga I rear axle.
- 136.00 mm flange diameter with 5-hole rim pattern and 108.00 mm bolt circle matches the original mounting configuration on the Kuga I rear hub.
- 30.00 mm inner diameter provides the correct bearing envelope for this non-ABS application.
- Cross-references to SKF VKBA 6638, FAG 713678980, SNR R152.78, and OPTIMAL 302105 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Ford Kuga I (2008-2012) models without ABS. Confirm your vehicle is non-ABS before ordering.
- Confirm the 5-hole rim pattern and 136.00 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Check for proper wheel rotation and bearing pre-load after installation. This non-ABS hub does not have a sensor connector.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
