Wheel Hub VKBA3928
The DUHUI Bearing VKBA3928 wheel hub is a rear axle hub assembly engineered for Nissan Prairie Pro (M11), Primera Wagon (W10), Altima, Axxess, and Stanza models from 1988 through 2001 without ABS. This rear wheel hub bearing matches OE references including 43200-70N05, 43200-70N07, and 43200-99N00, with cross-references to SKF VKBA 3928 and SNR R168.21. It features a 148.40 mm flange diameter, a 4-hole rim pattern, and a non-ABS bearing configuration, designed for direct replacement on these Nissan rear axles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0207 |
| Part Number | VKBA3928 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Outer Diameter | 148.40 mm (5.843 inch) |
| Flange Diameter | 148.40 mm (5.843 inch) |
| Bolt Circle Diameter | 137.20 mm (5.402 inch) |
| Wheel Pilot Diameter | 65.90 mm (2.594 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Rim Hole Number | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Not Included (Non-ABS Model) |
| Weight | 2.50 kg (5.51 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0207
OE Numbers: 43200-70N05, 43200-70N07, 43200-99N00, 43200-99N01, 43200-50R10, 4000170NR5
Reference Numbers (Interchange):
SKF: VKBA 3928
SNR: R168.21
FAG: 713 6188 50
MOOG: NI-WB-11759
OPTIMAL: 962605
BLUE PRINT: ADN18246
HERTH+BUSS JAKOPARTS: J4711027
NIPPARTS: J4711027
FEBI BILSTEIN: 175518
GSP: 9228017
A.B.S.: 201206
SPIDAN: 27111
Vehicle Fitment
NISSAN: Prairie Pro (M11) MPV (1988-1998) 2.0, 2.4 4×4; Primera (W10) Estate (1990-1998) 1.6, 2.0, 2.0 D; Altima (1993-2001) 2.4 (Non-ABS Models); Axxess (1990-1991) 2.4 FWD; Stanza (1990-1992) 2.0, 2.4
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit designed for Nissan Prairie Pro (M11), Primera Wagon (W10), Altima, Axxess, and Stanza models without ABS, covering the 1988 through 2001 model range.
- Matches Nissan OE numbers 43200-70N05, 43200-70N07, 43200-99N00, and 43200-50R10 for direct replacement.
- 148.40 mm flange diameter with 4-hole rim pattern and 137.20 mm bolt circle matches the original mounting configuration on these rear hubs.
- Pre-assembled hub unit with sealed bearing simplifies installation and eliminates bearing pressing.
- Cross-references to SKF VKBA 3928, FAG 713 6188 50, SNR R168.21, and Blue Print ADN18246 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Nissan Prairie Pro (M11) (1988-1998), Primera Wagon (W10) (1990-1998), Altima (1993-2001), Axxess (1990-1991), and Stanza (1990-1992) models without ABS. Confirm your vehicle is non-ABS before ordering.
- Confirm the 4-hole rim pattern and 148.40 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Check for proper wheel rotation and bearing pre-load after installation. This non-ABS hub does not have a sensor connector.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
