Wheel Hub VKBA3795
The DUHUI Bearing VKBA3795 wheel hub is a rear axle hub assembly engineered for Hyundai Coupe I (RD) models from 1996 through 2002. This rear wheel hub bearing matches OE references including 52710-29100, 52710-29150, and 52710-29450, with cross-references to SKF VKBA 3795, FAG 713619490, and SNR R184.10. It features a 139.00 mm flange diameter, a 4-hole rim pattern, and a non-ABS bearing configuration, designed for direct replacement on the Hyundai Coupe I RD rear axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0202 |
| Part Number | VKBA3795 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 28.00 mm (1.102 inch) |
| Outer Diameter | 139.00 mm (5.472 inch) |
| Width | 64.40 mm (2.535 inch) |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Bolt Hole Circle Diameter | 114.30 mm (4.500 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | Not Included (Non-ABS Model) |
| Weight | 2.53 kg (5.58 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0202
OE Numbers: 52710-29100, 52710-29150, 52710-29450, 52710-29470, 52710-29050, 52710-25450, 52710-29471, 42745-37000
Reference Numbers (Interchange):
SKF: VKBA 3795
FAG: 713619490
SNR: R184.10
RUVILLE: 8410
SPIDAN: 27352
MOOG: HY-WB-11760
OPTIMAL: 982608
BLUE PRINT: ADG08321
NIPPARTS: N4710509
FEBI BILSTEIN: 175518
GSP: 9230064
A.B.S.: 201336
Vehicle Fitment
HYUNDAI: Coupe I (RD) (1996-2002) 1.6 i 16V (RD), 1.6 16V (RD), 1.8 SX, 2.0 16V (RD), 2.0 FX (Non-ABS Models)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit designed for Hyundai Coupe I (RD) models without ABS, covering the 1996 through 2002 model range.
- Matches Hyundai OE numbers 52710-29100, 52710-29150, 52710-29450, and 52710-29470 for direct replacement on the Coupe I RD rear axle.
- 139.00 mm flange diameter with 4-hole rim pattern and 114.30 mm bolt circle matches the original mounting configuration on the Coupe I rear hub.
- 28.00 mm inner diameter and 64.40 mm width provide the correct bearing envelope for this non-ABS application.
- Cross-references to SKF VKBA 3795, FAG 713619490, SNR R184.10, and SPIDAN 27352 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Hyundai Coupe I (RD) (1996-2002) models without ABS. Confirm your vehicle is non-ABS before ordering.
- Confirm the 4-hole rim pattern and 139.00 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Check for proper wheel rotation and bearing pre-load after installation. This non-ABS hub does not have a sensor connector.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
