Wheel Hub VKBA3665
The DUHUI Bearing VKBA3665 wheel hub is a direct OE-replacement assembly designed for BMW 3 Series Sedan (E30) models from 1982 through 1992, 3 Series Cabriolet (E30) models from 1983 through 1993, 3 Series Touring (E30) models from 1987 through 1994, and Z1 Convertible (E30) models from 1988 through 1991. This front wheel hub bearing matches OE references including 31 22 1 127 574 and 31 22 1 139 338. It features a Gen 2 hub unit design with 4 wheel studs, a 120.00 mm flange diameter, and an integrated ABS sensor, engineered for front axle applications on these sedan, cabriolet, and touring platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0436 |
| Part Number | VKBA3665 |
| Position | Front Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing, Double Row Angular Contact |
| Inner Diameter | 42.00 mm (1.654 inch) |
| Outer Diameter | 120.00 mm (4.724 inch) |
| Flange Diameter | 120.00 mm (4.724 inch) |
| Flange Offset | 37.00 mm (1.457 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Wheel Pilot Diameter | 57.00 mm (2.244 inch) |
| Brake Pilot Diameter | 66.00 mm (2.598 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0436
OE Numbers: 31 22 1 127 574, 31221127574, 31 22 1 139 338, 31221139338, 31 22 1 128 569, 31221128569
Reference Numbers (Interchange):
SKF: VKBA3665
SKF: VKBA 3665
FAG: 713667220
SNR: R150.17
Optimal: 262042
BTA: 26365
BTA: 27361
Meyle: 300 312 2602
Febi Bilstein: 05542
Kavo Parts: WBK-1503
SPIDAN: 26365
Quinton Hazell: QWB534
MAPCO: 26742
Topran: 500 635
VAICO: V20-0502
Vehicle Fitment
BMW: 3 Series Sedan (E30) (1982-1992) 316i, 318i, 318is, 320i, 320is, 323i, 324d, 324td, 325e, 325i, 325is, 325ix, M3, 3 Series Cabriolet (E30) (1983-1993), 3 Series Touring (E30) (1987-1994), Z1 Convertible (E30) (1988-1991)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing, flange, and ABS sensor into one pre-assembled unit for simplified front axle installation on BMW E30 platforms.
- Integrated ABS sensor ensures proper speed signal transmission for vehicles equipped with anti-lock braking systems.
- 120.00 mm flange diameter with 4-stud wheel pattern and 100.00 mm bolt circle matches the original mounting configuration on E30 front axles.
- 57.00 mm wheel pilot diameter and 66.00 mm brake pilot diameter ensure proper wheel and brake component alignment.
- Double row angular contact ball bearing design provides stable load distribution for front axle applications.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA3665, FAG 713667220, SNR R150.17, and Optimal 262042 ensure accurate replacement sourcing.
Installation Notes
- This kit is for front axle applications on BMW 3 Series (E30) (1982-1994) and Z1 (E30) (1988-1991) models including 316i, 318i, 318is, 320i, 323i, 324d, 324td, 325e, 325i, 325is, M3, and Touring variants.
- Confirm the 4-stud wheel pattern and 120.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and front strut housing thoroughly before installation.
- This bearing is pressed into the front strut housing. Use a large socket or press tool that contacts the outer race only during installation. Do not press on the inner race.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
