Wheel Hub VKBA3610 For SAIC-MG Rover
The DUHUI Bearing VKBA3610 wheel hub is a rear axle hub assembly engineered for MG ZR and Rover 200 (RF) models from 1995 through 2005. This rear wheel hub bearing matches OE references including RLB000070, GHK1685, and RLB000071, with cross-references to SKF VKBA 3610, FAG 713617410, and SNR R161.29. It features a 135.80 mm flange diameter, a 4-hole rim pattern, and a non-ABS bearing configuration, designed for direct replacement on these MG and Rover rear axles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0152 |
| Part Number | VKBA3610 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Outer Diameter | 135.80 mm (5.346 inch) |
| Width | 69.80 mm (2.748 inch) |
| Flange Diameter | 135.80 mm (5.346 inch) |
| Bolt Hole Circle Diameter | 100.00 mm (3.937 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | Not Included (Non-ABS Model) |
| Weight | 2.65 kg (5.84 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0152
OE Numbers: RLB000070, GHK1685, RLB000071, RLB000072
Reference Numbers (Interchange):
SKF: VKBA 3610
FAG: 713617410
SNR: R161.29
QUINTON HAZELL: QWB1060
SPIDAN: 27564, 27639
RUVILLE: 6129
OPTIMAL: 952507
BLUE PRINT: ADH28316
MOOG: RO-WB-11715
TIMKEN: 512255
BCA: 512255
A.B.S.: 201376
Vehicle Fitment
MG: ZR (2001-2005) 105, 120, 160, 2.0 TD
ROVER: 200 II Hatchback (RF) (1995-2000) 211, 214 i, 214 Si, 216 Si, 220 D/SDi, 220 Turbo; 25 Hatchback (RF) (1999-2005) 1.4, 1.6, 1.8, 2.0 TD
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit designed for MG ZR and Rover 200 II / 25 (RF) models without ABS, covering the 1995 through 2005 model range.
- Matches MG and Rover OE numbers RLB000070, GHK1685, RLB000071, and RLB000072 for direct replacement.
- 135.80 mm flange diameter with 4-hole rim pattern and 100.00 mm bolt circle matches the original mounting configuration on these rear hubs.
- 30.00 mm inner diameter and 69.80 mm width provide the correct bearing envelope for this application.
- Cross-references to SKF VKBA 3610, FAG 713617410, SNR R161.29, and QUINTON HAZELL QWB1060 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on MG ZR (2001-2005) and Rover 200 II / 25 (RF) (1995-2005) models without ABS. Confirm your vehicle is non-ABS before ordering.
- Confirm the 4-hole rim pattern and 135.80 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Check for proper wheel rotation and bearing pre-load after installation. This non-ABS hub does not have a sensor connector.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
