Wheel Hub VKBA3310
The DUHUI Bearing VKBA3310 wheel hub is a rear axle hub assembly engineered for Nissan 200SX Coupe (S13, S14) models from 1988 through 1999 without ABS. This rear wheel hub bearing matches OE references 4321035F01, 4321035F06, and 43210AA100 and cross-references to SKF VKBA 3310, FAG 713613480, and SNR R168.46. It features a 130.00 mm outer diameter, a 4-hole rim pattern, dimensions of 43.00 mm inner diameter and 56.00 mm width, and no ABS sensor for direct replacement on the 200SX rear axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0064 |
| Part Number | VKBA3310 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Hub Bearing Kit |
| Inner Diameter | 43.00 mm (1.693 inch) |
| Outer Diameter | 130.00 mm (5.118 inch) |
| Width | 56.00 mm (2.205 inch) |
| Flange Diameter | 130.00 mm (5.118 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | No |
| Weight | 2.10 kg (4.630 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0064
OE Numbers: 4321035F01, 4321035F06, 43210AA100
Reference Numbers (Interchange):
FAG: 713613480
SNR: R168.46
RUVILLE: 6846
SPIDAN: 961751
HERTH+BUSS JAKOPARTS: J4711017
OPTIMAL: 961751
MOOG: NI-WB-11804
TIMKEN: 512038
BCA: 512038
GMB: GH20428
GSP: 9230030
A.B.S.: 200062
FIRST LINE: FBK818
MGA: KR3297
JAPANPARTS: KK25007
Vehicle Fitment
NISSAN: 200SX Coupe (S13) (1988-1995), 200SX Coupe (S14) (1993-1999)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing kit for Nissan 200SX Coupe (S13, S14) models without ABS.
- Matches OE numbers 4321035F01, 4321035F06, and 43210AA100 and cross-references to SKF VKBA 3310, FAG 713613480, SNR R168.46, and TIMKEN 512038 for simplified sourcing and verification.
- 130.00 mm outer diameter with 4-hole rim pattern matches the original mounting configuration on the 200SX rear hub.
- 43.00 mm inner diameter and 56.00 mm width provide the correct bearing envelope for this rear axle application.
- No ABS sensor. This hub is for vehicles without ABS.
- Kit includes wheel bearing unit, axle nut, and dust cap for complete replacement.
Installation Notes
- This hub is for rear axle applications on Nissan 200SX Coupe (S13, S14) models from 1988 through 1999 without ABS. Confirm your vehicle has no ABS before ordering.
- Confirm the 4-hole rim pattern and 130.00 mm outer diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Torque the axle nut to the vehicle manufacturer specification after installation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
