Wheel Hub VKBA3268
The DUHUI Bearing VKBA3268 wheel hub is a rear axle hub assembly engineered for Hyundai Accent I (X-3) models from 1994 through 2000 equipped with ABS. This rear wheel hub bearing matches OE reference 5271022600 and cross-references to SKF VKBA 3268, FAG 713619470, and SNR R184.19. It features an integrated ABS sensor ring with 29 teeth, a 139.00 mm flange diameter, a 4-hole rim pattern with M12 x 1.5 studs, and dimensions of 28.00 mm inner diameter and 63.00 mm width for direct replacement on the Accent I rear axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0047 |
| Part Number | VKBA3268 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Hub Bearing Kit |
| Inner Diameter | 28.00 mm (1.102 inch) |
| Outer Diameter | 139.00 mm (5.472 inch) |
| Width | 63.00 mm (2.480 inch) |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Bolt Size | M12 x 1.5 |
| Bolt Quantity | 4 |
| Rim Hole Number | 4 |
| ABS Sensor | Has ABS with Tone Ring Sensor |
| ABS Ring Teeth | 29 |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0047
OE Numbers: 5271022600, 5271022601
Reference Numbers (Interchange):
FAG: 713619470
SNR: R184.19
RUVILLE: 8420
SPIDAN: 27446
OPTIMAL: 922806
HERTH+BUSS JAKOPARTS: J4710502
QUINTON HAZELL: QWB1080
BLUE PRINT: ADG08322
MOOG: HY-WB-12008
TIMKEN: 512194
BCA: 512194
GMB: 7460206
GSP: 9230008
A.B.S.: 200191
FIRST LINE: FBK769
Vehicle Fitment
HYUNDAI: Accent I (X-3) 1.3 (1994-2000), Accent I (X-3) 1.3 i 12V (1994-2000)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing kit with integrated 29-tooth ABS sensor ring for Hyundai Accent I (X-3) models equipped with ABS.
- Matches OE numbers 5271022600 and 5271022601 and cross-references to SKF VKBA 3268, SNR R184.19, BLUE PRINT ADG08322, and TIMKEN 512194 for simplified sourcing and verification.
- 139.00 mm flange diameter with 4-hole rim pattern matches the original mounting configuration on the Accent I rear hub.
- 28.00 mm inner diameter and 63.00 mm width provide the correct bearing envelope for this rear axle application.
- M12 x 1.5 wheel studs match the original thread specification for proper torque and wheel seating.
- Kit includes wheel bearing unit, ABS sensor ring, axle nuts, and dust cap for complete replacement.
Installation Notes
- This hub is for rear axle applications on Hyundai Accent I (X-3) models from 1994 through 2000 equipped with ABS. Confirm your vehicle has ABS before ordering.
- Confirm the 4-hole rim pattern and 139.00 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Torque the axle nuts to the vehicle manufacturer specification after installation.
- Inspect the integrated 29-tooth ABS sensor ring for damage before installation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us、
