Wheel Hub VKBA3252
The DUHUI Bearing VKBA3252 wheel hub is a rear axle hub assembly engineered for Nissan Maxima / Maxima QX IV (A32) models from 1995 through 2000 equipped with ABS. This rear wheel hub bearing matches OE reference 43200-85E11 and cross-references to SKF VKBA 3252, FAG 713613470, and SNR R168.79. It features an integrated ABS sensor ring with 46 teeth, a 5-hole rim pattern, and dimensions of 30.00 mm inner diameter, 57.00 mm outer diameter, and 48.00 mm width for direct replacement on the Maxima QX IV rear axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0040 |
| Part Number | VKBA3252 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Hub Bearing Kit |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Outer Diameter | 57.00 mm (2.244 inch) |
| Width | 48.00 mm (1.890 inch) |
| ABS Sensor | Has ABS with Sensor Ring |
| ABS Ring Diameter | 67.00 mm (2.638 inch) |
| ABS Ring Teeth | 46 |
| Rim Hole Number | 5 |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0040
OE Numbers: 43200-85E11, 43200-85E10, 43200-2Y000
Reference Numbers (Interchange):
FAG: 713613470
SNR: R168.79
RUVILLE: 6846
SPIDAN: 962779
OPTIMAL: 962779
MOOG: NI-WB-11802
TIMKEN: 512034
BCA: 512034
GMB: GH20426
GSP: 9230026
A.B.S.: 200058
FIRST LINE: FBK809
MGA: KR3293
HERTH+BUSS JAKOPARTS: J4711015
JAPANPARTS: KK25005
Vehicle Fitment
NISSAN: Maxima / Maxima QX IV (A32) 2.0 (1995-2000), Maxima / Maxima QX IV (A32) 3.0 (1995-2000)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing kit with integrated 46-tooth ABS sensor ring for Nissan Maxima / Maxima QX IV (A32) models equipped with ABS.
- Matches OE numbers 43200-85E11, 43200-85E10, and 43200-2Y000 and cross-references to SKF VKBA 3252, FAG 713613470, SNR R168.79, and TIMKEN 512034 for simplified sourcing and verification.
- 5-hole rim pattern matches the original mounting configuration on the Maxima QX IV rear hub.
- 30.00 mm inner diameter, 57.00 mm outer diameter, and 48.00 mm width provide the correct bearing envelope for this rear axle application.
- Integrated 46-tooth ABS ring with 67.00 mm diameter matches the original signal output for the vehicle ABS system.
- Kit includes wheel bearing unit, ABS sensor ring, axle nut, and dust cap for complete replacement.
Installation Notes
- This hub is for rear axle applications on Nissan Maxima / Maxima QX IV (A32) models from 1995 through 2000 equipped with ABS. Confirm your vehicle has ABS before ordering.
- Confirm the 5-hole rim pattern and 67.00 mm ABS ring diameter match your vehicle configuration before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Torque the axle nut to the vehicle manufacturer specification after installation.
- Inspect the integrated 46-tooth ABS sensor ring for damage before installation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
