Wheel Hub EC0133047
The DUHUI Bearing EC0133047 wheel hub is a direct OE-replacement assembly designed for Ford Escape models from 2001 through 2012, Mazda Tribute models from 2001 through 2011, and Mercury Mariner models from 2005 through 2011. This rear wheel hub bearing matches OE references including EC01-33-047, EC01-33-047A, and YL8Z-1215-AA. It features a Gen 1 hub unit design with 5 wheel studs and a non-integral ABS sensor, engineered for rear axle applications on these compact SUV platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0449 |
| Part Number | EC0133047 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 1 Hub Assembly |
| Bearing Type | Ball Bearing |
| Inside Diameter | 42.00 mm (1.654 inch) |
| Outside Diameter | 78.00 mm (3.071 inch) |
| Width | 89.00 mm (3.504 inch) |
| Wheel Stud Quantity | 5 |
| ABS Sensor | Non-Integral |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0449
OE Numbers: EC01-33-047, EC01-33-047A, EC01-33-047B, YL8Z-1215-AA
Reference Numbers (Interchange):
SKF: BR930286
SKF: BR930567K
Timken: 510072
BCA: 510072
MOOG: 510072
NTN: WE60558
GSP: 111029
GSP: 110004
Mevotech: H510072
Dorman: 951-810
Motorcraft: H2MZ-1104-T
Driveworks: 510072
Quality-Built: WH510072
Precision: 295-51072
Vehicle Fitment
FORD: Escape (2001-2012) FWD, 4WD
MAZDA: Tribute (2001-2011) FWD, 4WD
MERCURY: Mariner (2005-2011) FWD, 4WD
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 1 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on Ford Escape, Mazda Tribute, and Mercury Mariner platforms.
- Non-integral ABS sensor design for vehicles with rear anti-lock braking systems – reuses the original sensor where applicable.
- 42.00 mm inside diameter and 78.00 mm outside diameter match the original bearing envelope on Escape and Tribute rear axles.
- 5 wheel studs ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF BR930286, Timken 510072, BCA 510072, and MOOG 510072 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Ford Escape (2001-2012), Mazda Tribute (2001-2011), and Mercury Mariner (2005-2011) models with rear ABS.
- Confirm the 5-stud wheel pattern and 78.00 mm outside diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench to avoid bearing damage.
- Inspect the ABS sensor and tone ring for damage before installation, as this hub uses a non-integral sensor design.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
