Wheel Hub 6N0407613
The DUHUI Bearing 6N0407613 front wheel hub is a direct OE-replacement assembly designed for Volkswagen Polo, Lupo, and SEAT Arosa models spanning 1994 through 2012. This front wheel hub bearing matches OE references 485409, 32901902, 15725, and 1141400600, delivering factory-spec performance for compact hatchback and sedan applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH2010 |
| Part Number | 6N0407613 |
| Position | Front Axle |
| Diameter 1 | 35.00 mm (1.378 inch) |
| Diameter 2 | 65.00 mm (2.559 inch) |
| Height | 75.00 mm (2.953 inch) |
| Number of Holes | 4 |
| Number of Teeth | 22 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH2010
OE Numbers: 6N0407613, 485409, 32901902, 15725, 1141400600
Reference Numbers (Interchange):
SKF: VKBA 7087
Timken: HA590738
NTN: HUB227
Vehicle Fitment
Volkswagen: Lupo Hatchback (6X1, 6E1) (1998-2005)
Volkswagen: Polo Hatchback (6N1) (1994-1999)
Volkswagen: Polo Hatchback (6N2) (1999-2001)
Volkswagen: Polo Hatchback (9N) (2001-2012)
Volkswagen: Polo Sedan (6KV2) (1995-2009)
Volkswagen: Polo Sedan (2002-2012)
Volkswagen: Polo Box Truck (6NF) (1994-1999)
Volkswagen: Polo Estate (6KV5) (1997-2001)
SEAT: Arosa Hatchback (6H) (1997-2004)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for VW Polo, Lupo, and SEAT Arosa compact applications.
- 75mm height with dual diameter design (35mm/65mm) matches factory specifications.
- 4-hole configuration with 22-tooth count fits original hub and axle interface.
- Direct OE cross-reference to 485409, 32901902, 15725, and 1141400600.
- Factory-sealed bearing unit reduces contamination risk during service life.
Installation Notes
- Confirm diameters (35mm and 65mm), height (75mm), 4-hole pattern, and 22-tooth count match your original bearing before installation.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to the applicable VW or SEAT factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
