Wheel Hub 541004
The DUHUI Bearing 541004 rear wheel hub is a direct OE-replacement assembly designed for Nissan Armada, Pathfinder, and Infiniti QX56 truck and SUV models from 2004 through 2007. This rear wheel hub bearing matches OE references RW41004 and 432027S000, and features an integrated ABS sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01649 |
| Part Number | 541004 |
| Position | Rear Axle |
| Flange Diameter | 171.45 mm (6.750 inch) |
| Bolt Circle Diameter | 139.70 mm (5.500 inch) |
| Hub Pilot Diameter | 88.90 mm (3.500 inch) |
| Wheel Pilot Diameter | 77.72 mm (3.060 inch) |
| Brake Pilot Diameter | 82.04 mm (3.230 inch) |
| Flange Offset | 56.74 mm (2.234 inch) |
| Hub Bolt Circle Diameter | 114.00 mm (4.488 inch) |
| Bolt Size (Wheel Studs) | M12 x 1.25 |
| Bolt Size (Hub Mounting) | M12 x 1.75 |
| Wheel Stud Quantity | 6 |
| Mounting Bolt Holes | 4 |
| Spline Quantity | 32 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01649
OE Numbers: 541004, RW41004, 432027S000
Reference Numbers (Interchange):
SKF: RW41004
Timken: HA590725
NTN: HUB214
Vehicle Fitment
Nissan: Armada (2004-2007)
Nissan: Pathfinder (2004-2007)
Infiniti: QX56 (2004-2007)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear axle wheel hub bearing engineered for Nissan Armada, Pathfinder, and Infiniti QX56 truck/SUV applications.
- Integrated ABS sensor eliminates separate sensor purchase and installation.
- 6-stud configuration with 32-spline axle interface matches factory heavy-duty driveline specifications.
- 171.45mm flange diameter with 139.70mm bolt circle provides robust load capacity for truck and SUV applications.
- Direct OE cross-reference to RW41004 and 432027S000.
Installation Notes
- Confirm 6-stud pattern, 139.70mm bolt circle, 171.45mm flange diameter, and 32-spline count match your original hub before installation.
- Note the two different M12 bolt sizes: wheel studs are M12 x 1.25; hub mounting bolts are M12 x 1.75 – verify both match your original hardware.
- Inspect the rear axle housing and bearing bore for wear or damage prior to fitting.
- Clean all mounting surfaces thoroughly and verify ABS sensor connector compatibility.
- Torque the hub retaining nut and wheel lug nuts to Nissan/Infiniti factory specifications.
- After installation, verify ABS sensor function with a diagnostic tool.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
