Wheel Hub 541003
The DUHUI Bearing 541003 rear wheel hub is a direct OE-replacement assembly designed for Nissan Pathfinder (R51) SUV models from 2005 through 2007. This rear wheel hub bearing matches OE references JRM5000S and 43224X00A, delivering factory-spec performance for SUV applications without ABS sensor ring.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01648 |
| Part Number | 541003 |
| Position | Rear Axle |
| Flange Diameter | 148.01 mm (5.827 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Hub Pilot Diameter | 89.00 mm (3.504 inch) |
| Brake Pilot Diameter | 67.95 mm (2.675 inch) |
| Flange Offset | 69.01 mm (2.717 inch) |
| Hub Bolt Circle Diameter | 114.00 mm (4.488 inch) |
| Bolt Size | M12 x 1.25 |
| Spline Quantity | 32 |
| ABS Sensor | Not Included |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01648
OE Numbers: 541003, JRM5000S, 43224X00A
Reference Numbers (Interchange):
SKF: JRM5000S
Timken: HA590726
NTN: HUB215
Vehicle Fitment
Nissan: Pathfinder SUV (R51) (2005-2007)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear axle wheel hub bearing engineered for Nissan Pathfinder R51 SUV applications.
- 32-spline axle interface matches factory driveline specifications.
- 148.01mm flange diameter with 114.30mm bolt circle provides robust load capacity.
- Non-ABS version – does not include ABS sensor ring. Suitable for vehicles without ABS or for ABS-deleted applications.
- Direct OE cross-reference to JRM5000S and 43224X00A.
Installation Notes
- Confirm bolt circle (114.30mm), flange diameter (148.01mm), 32-spline count, and M12 x 1.25 bolt size match your original hub before installation. Note: This hub does not include an ABS sensor ring.
- Inspect the rear axle housing and bearing bore for wear or damage prior to fitting.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Nissan Pathfinder factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
