Wheel Hub 518510
The DUHUI Bearing 518510 front wheel hub is a direct OE-replacement assembly designed for Ford Focus models from 2000 through 2009. This front wheel hub bearing matches OE references FW5510K, 7S4Z1104A, BR930263K, and HA590263K, delivering factory-spec performance for compact passenger car applications without ABS sensor ring.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1632 |
| Part Number | 518510 |
| Position | Front Axle |
| Flange Diameter | 132.08 mm (5.200 inch) |
| Bolt Circle Diameter | 109.22 mm (4.300 inch) |
| Hub Pilot Diameter | 71.12 mm (2.800 inch) |
| Wheel Pilot Diameter | 63.50 mm (2.500 inch) |
| Brake Pilot Diameter | 63.50 mm (2.500 inch) |
| Wheel Stud Quantity | 4 |
| Spline Quantity | 25 |
| ABS Sensor | Not Included |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1632
OE Numbers: 518510, FW5510K, 7S4Z1104A, BR930263K, HA590263K
Reference Numbers (Interchange):
SKF: FW5510K
Timken: HA590263K
NTN: HUB264
Vehicle Fitment
Ford: Focus (2000-2009)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Ford Focus compact applications.
- 4-stud configuration with 25-spline axle interface matches factory driveline specifications.
- 132.08mm flange diameter with 109.22mm bolt circle provides proper load capacity.
- Non-ABS version – does not include ABS sensor ring. Suitable for vehicles without ABS or for ABS-deleted applications.
- Direct OE cross-reference to FW5510K, 7S4Z1104A, BR930263K, and HA590263K.
Installation Notes
- Confirm 4-stud pattern, 109.22mm bolt circle, 132.08mm flange diameter, and 25-spline count match your original hub before installation. Note: This hub does not include an ABS sensor ring.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Ford Focus factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
