Wheel Hub 518508
The DUHUI Bearing 518508 front wheel hub is a direct OE-replacement assembly designed for Toyota Camry and Lexus RX models spanning 1991 through 2003. This front wheel hub bearing matches OE references FW5508K, BR930303K, and 4350232070, delivering factory-spec performance for mid-size sedan, estate, and luxury SUV applications without ABS sensor ring.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1630 |
| Part Number | 518508 |
| Position | Front Axle |
| Flange Diameter | 139.70 mm (5.500 inch) |
| Bolt Circle Diameter | 88.90 mm (3.500 inch) |
| Hub Pilot Diameter | 81.28 mm (3.200 inch) |
| Wheel Pilot Diameter | 60.96 mm (2.400 inch) |
| Brake Pilot Diameter | 60.96 mm (2.400 inch) |
| Wheel Stud Quantity | 5 |
| Spline Quantity | 26 |
| ABS Sensor | Not Included |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1630
OE Numbers: 518508, FW5508K, BR930303K, 4350232070, 28239
Reference Numbers (Interchange):
SKF: FW5508K
Timken: BR930303K
NTN: HUB267
Vehicle Fitment
Toyota: Camry Sedan (_V1_) (1991-1998)
Toyota: Camry Sedan (_V20) (1996-2002)
Toyota: Camry Estate (_V10) (1991-1997)
Toyota: Camry (1992-2003)
Lexus: RX (MCU15) (1998-2003)
Lexus: RX300 (1999-2003)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Toyota Camry and Lexus RX applications.
- 5-stud configuration with 26-spline axle interface matches factory driveline specifications.
- 139.70mm flange diameter with 88.90mm bolt circle provides proper load capacity.
- Non-ABS version – does not include ABS sensor ring. Suitable for vehicles without ABS or for ABS-deleted applications.
- Direct OE cross-reference to FW5508K, BR930303K, and 4350232070.
Installation Notes
- Confirm 5-stud pattern, 88.90mm bolt circle, 139.70mm flange diameter, and 26-spline count match your original hub before installation. Note: This hub does not include an ABS sensor ring.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Toyota/Lexus factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
