Wheel Hub 518507
The DUHUI Bearing 518507 front wheel hub is a direct OE-replacement assembly designed for Toyota Corolla FWD models spanning 1987 through 1997, including sedan and wagon body styles. This front wheel hub bearing matches OE references FW507K and BR930300K, delivering factory-spec performance for compact passenger car applications without ABS sensor ring.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1629 |
| Part Number | 518507 |
| Position | Front Axle |
| Flange Diameter | 124.00 mm (4.882 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Hub Pilot Diameter | 38.04 mm (1.498 inch) |
| Wheel Pilot Diameter | 54.00 mm (2.126 inch) |
| Brake Pilot Diameter | 54.00 mm (2.126 inch) |
| Flange Offset | 27.97 mm (1.101 inch) |
| Bolt Size | 4844 |
| Wheel Stud Quantity | 4 |
| Spline Quantity | 26 |
| ABS Sensor | Not Included |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1629
OE Numbers: 518507, FW507K, BR930300K
Reference Numbers (Interchange):
SKF: FW507K
Timken: HA590766
NTN: HUB255
Vehicle Fitment
Toyota: Corolla FWD (1987 Sedan, from Aug 1/1987)
Toyota: Corolla FWD (1987 Wagon, from Aug 1/1987)
Toyota: Corolla FWD (1988-1991 Sedan)
Toyota: Corolla FWD (1988-1991 Wagon)
Toyota: Corolla (1992 FWD, Japan production)
Toyota: Corolla (1993-1997 Non-ABS)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Toyota Corolla FWD applications.
- 4-stud configuration with 26-spline axle interface matches factory driveline specifications.
- 124mm flange diameter with 100mm bolt circle provides proper load capacity.
- Non-ABS version – does not include ABS sensor ring. Suitable for vehicles without ABS or for ABS-deleted applications.
- Direct OE cross-reference to FW507K and BR930300K.
Installation Notes
- Confirm 4-stud pattern, 100mm bolt circle, 124mm flange diameter, and 26-spline count match your original hub before installation. Note: This hub does not include an ABS sensor ring.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Toyota Corolla factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
