Wheel Hub 5175147000
The DUHUI Bearing 5175147000 wheel hub is a direct OE-replacement assembly designed for Hyundai H-1 (A1) models from 1997 through 2008 and MG 6 models from 2010 onward. This front wheel hub bearing matches OE references including 51751-47000 and 51750-47000. It features a complete hub assembly with an integrated bearing, a 5-hole rim pattern, and a 100.00 mm height, engineered for front axle applications on these van and sedan platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0525 |
| Part Number | 5175147000 |
| Position | Front Axle (Left, Right) |
| Bearing Type | Wheel Hub Assembly with Integrated Bearing |
| Inner Diameter | 65.00 mm (2.559 inch) |
| Inner Diameter 2 | 53.00 mm (2.087 inch) |
| Outer Diameter | 87.00 mm (3.425 inch) |
| Outer Diameter 1 | 67.00 mm (2.638 inch) |
| Height | 100.00 mm (3.937 inch) |
| Rim Hole Number | 5 |
| ABS Sensor | Non-Integral |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0525
OE Numbers: 51751-47000, 51750-47000, 5175147000, 5175047000
Reference Numbers (Interchange):
SKF: VKBA 6907
BTA: H50522BTA
BTA: H50521BTA
STELLOX: 43-29076-SX
JAPANPARTS: KK-10332
JAPKO: 410332
ASHIKA: 44-10332
GSP: 9499041
FEBI BILSTEIN: 46276
OPTIMAL: 951914
PATRON: PBK4090H
NTY: KLP-HY-514
Vehicle Fitment
HYUNDAI: H-1 I (A1) Box (1997-2007), H-1 I (A1) Bus (1997-2007), H-1 I (A1) Platform/Chassis (2000-2006), H-1 Starex (2001-2007), H-1 Van (2003-2007), H100 (1996-2006)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front hub assembly with integrated bearing for simplified installation on Hyundai H-1 and MG 6 platforms.
- 65.00 mm inner diameter and 87.00 mm outer diameter match the original bearing envelope on H-1 and MG 6 front axles.
- 100.00 mm height provides the correct hub offset for these van and sedan applications.
- 5-hole rim pattern matches the OEM wheel mounting configuration.
- Non-integral ABS sensor design for vehicles with front anti-lock braking systems – reuses the original sensor where applicable.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to BTA H50522BTA, JAPANPARTS KK-10332, GSP 9499041, and FEBI BILSTEIN 46276 ensure accurate replacement sourcing.
Installation Notes
- This hub is for front axle applications on Hyundai H-1 (A1) (1997-2007), H100 (1996-2006), Porter II (2004-), and MG 6 (2010-) models with front ABS.
- Confirm the 5-hole rim pattern and 87.00 mm outer diameter match your vehicle mounting configuration.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and hub mounting bolts to manufacturer specifications for the respective platform.
- Inspect the ABS sensor and tone ring for damage before installation, as this hub uses a non-integral sensor design.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
