Wheel Hub 515166
Wheel Hub 515166 – Front Wheel Hub Bearing for Ford F-150 and Expedition
The DUHUI Bearing 515166 wheel hub is a direct OE-replacement assembly designed for Ford F-150 and Expedition models. This front wheel hub bearing matches OE references including 515166, BL3Z1104C, and CL3Z1104D, and is engineered for front axle applications on these trucks and SUVs. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1744 |
| Part Number | 515166 |
| Position | Front Axle |
| Bearing Type | Gen 3 Hub Assembly |
| Outer Diameter | 183.00 mm (7.205 inch) |
| Outer Diameter 1 | 99.30 mm (3.909 inch) |
| Width | 102.30 mm (4.028 inch) |
| Width 1 | 45.60 mm (1.795 inch) |
| Bolt Circle Diameter | 135.00 mm (5.315 inch) |
| Brake Pilot Diameter | 90.00 mm (3.543 inch) |
| Hub Pilot Diameter | 99.20 mm (3.906 inch) |
| Wheel Pilot Diameter | 86.70 mm (3.413 inch) |
| Flange Offset | 45.50 mm (1.791 inch) |
| Flange Bolt Hole Quantity | 4 |
| Wheel Stud Quantity | 6 |
| Bolt Size | M14 x 2.0 |
| Spline Quantity | 45 |
| ABS Sensor | Integrated |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1744
OE Numbers: 515166, 301968, BL3Z1104C, CL3Z1104D, CL3Z1104L
Reference Numbers (Interchange):
SKF: BR931100
Timken: SP550222
MOOG: 515166
Mevotech: MB40311
BCA: WE61981
GMB: 725-3350
Vehicle Fitment
Ford: F-150 (2011-2014), Expedition (2011-2014), F-150 SVT Raptor (2011-2014)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified front axle installation.
- Integrated ABS sensor provides wheel speed signal directly from the hub assembly.
- 45-spline count ensures proper engagement with the axle shaft on 4WD models.
- 6 wheel studs with M14 x 2.0 thread ensure proper wheel mounting and torque distribution.
- 183.00 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Ford F-150 and Expedition models.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
Installation Notes
- This hub is for front axle applications on Ford F-150 (2011-2014) and Expedition (2011-2014) models – verify position before ordering.
- Confirm the 45-spline count on the axle shaft matches this hub before installation.
- Clean the knuckle mounting surface thoroughly before installation.
- Torque the axle nut to Ford factory specifications – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
