Wheel Hub 515121
The DUHUI Bearing 515121 front wheel hub is a direct OE-replacement assembly designed for Chevrolet Colorado pickup truck models from 2009 through 2012 with various engine configurations. This front wheel hub bearing matches OE references 25832144 and HA590304, delivering factory-spec performance for mid-size truck applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01614 |
| Part Number | 515121 |
| Position | Front Axle |
| Outside Diameter | 184.00 mm (7.244 inch) |
| Inside Diameter | 100.00 mm (3.937 inch) |
| Flange Bolt Hole Quantity | 4 |
| Number of Bolt Holes | 6 |
| Design Type | Gen 3 (Roll-Form) |
| ABS Sensor | Non-Integral |
| Pre-Greased | Yes |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01614
OE Numbers: 515121, 25832144, HA590304
Reference Numbers (Interchange):
SKF: HA590304
Timken: 515121
NTN: HUB230
Vehicle Fitment
Chevrolet: Colorado LT L4 2.9L (2009-2012)
Chevrolet: Colorado LT L5 3.7L (2009-2012)
Chevrolet: Colorado LT V8 5.3L (2009-2012)
Chevrolet: Colorado WT L4 2.9L (2009-2012)
Chevrolet: Colorado WT L5 3.7L (2009-2012)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Chevrolet Colorado mid-size truck applications.
- Gen 3 roll-form design provides improved structural integrity and durability.
- 184mm outside diameter with 100mm inside diameter matches factory specifications.
- 6-bolt wheel stud configuration with 4-bolt flange mounting for secure fitment.
- Factory pre-greased and sealed – ready for installation out of the box.
Installation Notes
- Confirm 184mm outside diameter, 100mm inside diameter, and 6-bolt pattern match your original hub before installation.
- This hub uses a non-integral ABS sensor – retain and transfer your existing ABS sensor or purchase separately as needed.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Chevrolet Colorado factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
