Wheel Hub 515074
The DUHUI Bearing 515074 front wheel hub is a direct OE-replacement assembly designed for Mitsubishi Pajero III (V60, V70) SUV models from 2000 through 2006. This front wheel hub bearing matches OE reference 515074, delivering factory-spec performance for off-road SUV applications without ABS sensor ring.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1569 |
| Part Number | 515074 |
| Position | Front Axle |
| Flange Diameter | 169.24 mm (6.663 inch) |
| Bolt Circle Diameter | 139.78 mm (5.503 inch) |
| Hub Pilot Diameter | 85.98 mm (3.385 inch) |
| Wheel Pilot Diameter | 67.06 mm (2.640 inch) |
| Brake Pilot Diameter | 94.01 mm (3.701 inch) |
| Hub Bolt Circle Diameter | 111.56 mm (4.392 inch) |
| Flange Offset | 37.54 mm (1.478 inch) |
| Bolt Size (Wheel Studs) | M12 x 1.5 |
| Bolt Size (Hub Mounting) | M12 x 1.25 |
| Wheel Stud Quantity | 6 |
| Mounting Bolt Holes | 4 |
| Spline Quantity | 30 |
| ABS Sensor | Not Included |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1569
OE Numbers: 515074
Reference Numbers (Interchange):
SKF: BR930576
Timken: HA590798
NTN: HUB301
Vehicle Fitment
Mitsubishi: Pajero III (V60, V70) (2000-2006)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Mitsubishi Pajero III SUV applications.
- 6-stud configuration with 30-spline axle interface matches factory driveline specifications.
- 169.24mm flange diameter with 139.78mm bolt circle provides robust load capacity for off-road applications.
- Non-ABS version – does not include ABS sensor ring. Suitable for vehicles without ABS or for ABS-deleted applications.
- Direct OE cross-reference to 515074 ensures accurate replacement.
Installation Notes
- Confirm 6-stud pattern, 139.78mm bolt circle, 169.24mm flange diameter, 30-spline count, and bolt sizes (M12 x 1.5 wheel studs, M12 x 1.25 mounting bolts) match your original hub before installation. Note: This hub does not include an ABS sensor ring.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Mitsubishi Pajero III factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
