Wheel Hub 515035
The DUHUI Bearing 515035 front wheel hub is a direct OE-replacement assembly designed for Dodge Ram 2500 4WD pickup truck models from 1998 through 1999 with 4-Wheel ABS and single rear wheel (SRW) configuration. This front wheel hub bearing matches OE references 52069876AA, FW735, and BR930408, and features an integrated ABS sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1531 |
| Part Number | 515035 |
| Position | Front Axle |
| Flange Diameter | 213.87 mm (8.420 inch) |
| Flange Shape | Modified Circle |
| Bolt Circle Diameter | 165.10 mm (6.500 inch) |
| Hub Pilot Diameter | 113.89 mm (4.484 inch) |
| Wheel Pilot Diameter | 121.16 mm (4.770 inch) |
| Brake Pilot Diameter | 121.16 mm (4.770 inch) |
| Hub Bolt Circle Diameter | 96.52 mm (3.800 inch) |
| Flange Offset | 75.31 mm (2.965 inch) |
| Bolt Size (Wheel Studs) | 9/16 x 18 |
| Bolt Size (Hub Mounting) | M14 x 1.5 |
| Wheel Stud Quantity | 8 |
| Mounting Bolt Holes | 4 |
| Spline Quantity | 33 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1531
OE Numbers: 515035, 52069876AA, FW735, BR930408
Reference Numbers (Interchange):
SKF: FW735
Timken: HA590831
NTN: HUB341
Vehicle Fitment
Dodge: Ram 2500 4WD, 4-Wheel ABS, Single Rear Wheels (1998-1999)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Dodge Ram 2500 4WD SRW heavy-duty pickup applications.
- Integrated ABS sensor eliminates separate sensor purchase and installation.
- 8-stud configuration with 33-spline axle interface matches heavy-duty factory specifications.
- Modified circle flange design with 213.87mm flange diameter and 165.10mm bolt circle provides maximum load capacity.
- Direct OE cross-reference to 52069876AA, FW735, and BR930408.
Installation Notes
- Confirm 8-stud pattern, 165.10mm bolt circle, 213.87mm flange diameter, 33-spline count, and bolt sizes (9/16 x 18 wheel studs, M14 x 1.5 mounting bolts) match your original hub before installation.
- Verify SRW (single rear wheel) application – this hub is not for DRW configurations.
- Verify 4-Wheel ABS configuration.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly and verify ABS sensor connector compatibility.
- Torque the hub retaining nut and wheel lug nuts to Dodge Ram 2500 factory specifications.
- After installation, verify ABS sensor function with a diagnostic tool.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
