Wheel Hub 513364
The DUHUI Bearing 513364 wheel hub is a direct OE-replacement assembly designed for Nissan Qashqai (J10) and X-Trail (T31) models. This front wheel hub bearing matches OE references including 513364, 513298, 402021KA0A, and 402023RA0B, and is engineered for front axle applications. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1750 |
| Part Number | 513364 |
| Position | Front Axle |
| Bearing Type | Gen 3 Hub Assembly |
| Flange Diameter | 136.00 mm (5.354 inch) |
| Flange Offset | 40.60 mm (1.598 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 65.90 mm (2.594 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Hub Pilot Diameter | 80.00 mm (3.150 inch) |
| Number of Bolts | 5 |
| Flange Bolt Hole Quantity | 4 |
| Spline Quantity | 29 |
| ABS Sensor | Integrated |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1750
OE Numbers: 513364, 513298, 402021KA0A, 402023RA0B, 0282J10F
Reference Numbers (Interchange):
SKF: BR930872
Timken: HA590538
NTN: WE60596
MOOG: 513364
Mevotech: MB30319
GMB: 750-0029
Vehicle Fitment
Nissan: Qashqai SUV (J10) (2006-2013), X-Trail SUV (T31) (2007-2014)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified front axle installation.
- Integrated ABS sensor provides wheel speed signal directly from the hub assembly.
- 136.00 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Nissan Qashqai and X-Trail models.
- 29-spline count ensures proper engagement with the axle shaft.
- 5 wheel studs with 114.30 mm bolt circle diameter ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
Installation Notes
- This hub is for front axle applications on Nissan Qashqai (J10) and X-Trail (T31) models – verify position before ordering.
- Confirm the 29-spline count on the axle shaft matches this hub before installation.
- Clean the knuckle mounting surface thoroughly before installation.
- Torque the axle nut to Nissan factory specifications for the Qashqai and X-Trail – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
