Wheel Hub 513301
The DUHUI Bearing 513301 front wheel hub is a direct OE-replacement assembly designed for a wide range of Audi models spanning 2007 through 2018, including A4, A5, A6, A7, A8, and Q5. This front wheel hub bearing matches OE references 713175010, BR930817, 4H0498625A, and WE60683, delivering factory-spec performance for luxury sedan, coupe, convertible, estate, and SUV applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1483 |
| Part Number | 513301 |
| Position | Front Axle |
| Inner Diameter | 61.00 mm (2.402 inch) |
| Outer Diameter 1 | 102.00 mm (4.016 inch) |
| Width | 40.50 mm (1.594 inch) |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1483
OE Numbers: 513301, 713175010, BR930817, 4H0498625A, WE60683
Reference Numbers (Interchange):
SKF: BR930817
Timken: HA590847
NTN: HUB361
Vehicle Fitment
Audi: A4 Sedan (8K2) (2007-2015)
Audi: A4 Allroad (8KH, B8) (2009-2016)
Audi: A4 Avant (8K5) (2007-2015)
Audi: A5 Coupe (2007-2017)
Audi: A5 Cabriolet (8F7) (2009-2017)
Audi: A5 Sportback (8TA) (2009-2017)
Audi: A6 (4G2, 4GC, C7) (2010-2018)
Audi: A6 Allroad (4GH, 4GJ) (2012-2018)
Audi: A6 Avant (4G5, 4GD, C7) (2011-2018)
Audi: A7 Sportback (4GA, 4GF) (2010-2018)
Audi: A8 (4H2, 4H8, 4HC, 4HL) (2009-2018)
Audi: Q5 (2008 and later)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for multiple Audi MLB platform vehicles.
- 61mm inner diameter with 102mm outer diameter and 40.5mm width matches factory bearing dimensions.
- Direct OE cross-reference to 713175010, BR930817, 4H0498625A, and WE60683.
- Factory-sealed bearing unit reduces contamination risk during service life.
- Pre-lubricated design eliminates the need for additional greasing.
Installation Notes
- Confirm inner diameter (61mm), outer diameter (102mm), and width (40.5mm) match your original bearing before installation.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Audi factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
