Wheel Hub 513278
The DUHUI Bearing 513278 front wheel hub is a direct OE-replacement assembly designed for Hyundai Genesis sedan and Genesis Coupe models from 2009 through 2012 with various engine configurations. This front wheel hub bearing matches OE reference 513278, delivering factory-spec performance for luxury sedan and sport coupe applications with non-integral ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01467 |
| Part Number | 513278 |
| Position | Front Axle |
| Outside Diameter | 139.00 mm (5.472 inch) |
| Inside Diameter | 69.00 mm (2.717 inch) |
| Flange Bolt Hole Quantity | 4 |
| Number of Bolt Holes | 5 |
| Design Type | Gen 3 (Roll-Form Design) |
| ABS Sensor | Non-Integral |
| Pre-Greased | Yes |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01467
OE Numbers: 513278
Reference Numbers (Interchange):
SKF: BR930538
Timken: HA590826
NTN: HUB335
Vehicle Fitment
Hyundai: Genesis 3.8 V6 (2009-2012)
Hyundai: Genesis 4.6 V8 (2009-2012)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Hyundai Genesis sedan and Coupe applications.
- Gen 3 roll-form design provides improved structural integrity and durability.
- Factory pre-greased and sealed – ready for installation out of the box.
- Non-integral ABS sensor design – retains original sensor or allows separate replacement.
- Direct OE cross-reference to 513278 ensures accurate replacement.
Installation Notes
- Confirm 139mm outside diameter, 69mm inside diameter, 5-stud pattern, and 4-bolt flange configuration match your original hub before installation.
- This hub uses a non-integral ABS sensor – retain and transfer your existing ABS sensor or purchase separately as needed.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Hyundai Genesis factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
