Wheel Hub 513270
The DUHUI Bearing 513270 front wheel hub is a direct OE-replacement assembly designed for Jeep Liberty (KK) and Dodge Nitro models from 2006 through 2012. This front wheel hub bearing matches OE references including 513270, 52109947AD, 52109947AE, VKBA6614, and HA590245, and features an integrated ABS sensor with 33-spline axle configuration for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1459 |
| Part Number | 513270 |
| Position | Front Axle |
| Flange Diameter | 154.36 mm (6.077 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 71.37 mm (2.810 inch) |
| Brake Pilot Diameter | 72.01 mm (2.835 inch) |
| Flange Offset | 48.59 mm (1.913 inch) |
| Hub Pilot Diameter | 92.00 mm (3.622 inch) |
| Hub Bolt Circle Diameter | 121.11 mm (4.768 inch) |
| Bolt Size | 1/2-20 |
| Wheel Stud Quantity | 5 |
| Mounting Bolt Hole Thread | M12 x 1.5 |
| Mounting Bolt Holes | 3 |
| ABS Sensor | Integrated |
| Number of Splines | 33 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1459
OE Numbers: 513270, 52109947AD, 52109947AE, VKBA6614, HA590245
Reference Numbers (Interchange):
SKF: VKBA6614
Timken: HA590245
NTN: WE61058
Vehicle Fitment
Jeep: Liberty (KK) 2007-2009, Liberty Limited V6 3.7L 2008-2009, Liberty North Edition V6 3.7L 2008, Liberty Sport V6 3.7L 2008-2009
Dodge: Nitro 2006-2012, Nitro R/T V6 4.0L 2007-2009, Nitro SE V6 3.7L 2008-2009, Nitro SLT V6 3.7L 2007-2009, Nitro SXT V6 3.7L 2007-2008
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Jeep Liberty (KK) and Dodge Nitro SUV applications.
- Integrated ABS sensor delivers wheel speed signals for brake system operation.
- 33-spline axle interface ensures proper engagement with the drive shaft.
- 5-stud configuration with 114.30 mm bolt circle matches factory wheel fitment.
- 3-bolt M12 x 1.5 mounting pattern with 154.36 mm flange diameter provides robust load capacity.
- Direct OE cross-reference to 513270, 52109947AD, 52109947AE, VKBA6614, and HA590245 ensures accurate replacement.
Installation Notes
- Verify the 33-spline count matches your axle shaft before installation.
- Confirm 5-stud pattern with 114.30 mm bolt circle and 3-bolt M12 x 1.5 mounting configuration.
- Check the ABS sensor connector type and wiring condition prior to fitting.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Jeep/Dodge factory specifications.
- After installation, test ABS function at low speed to confirm no warning light appears.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
