Wheel Hub 513229
The DUHUI Bearing 513229 front wheel hub is a direct OE-replacement assembly designed for Dodge Dakota 4-Wheel ABS models from 2005 through 2009. This front wheel hub bearing matches OE reference 513229 and features an integrated ABS sensor with 33-spline axle configuration for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01431 |
| Part Number | 513229 |
| Position | Front Axle |
| Flange Diameter | 182.88 mm (7.200 inch) |
| Bolt Circle Diameter | 139.70 mm (5.500 inch) |
| Wheel Pilot Diameter | 78.74 mm (3.100 inch) |
| Brake Pilot Diameter | 78.74 mm (3.100 inch) |
| Flange Offset | 48.26 mm (1.900 inch) |
| Hub Pilot Diameter | 104.14 mm (4.100 inch) |
| Hub Bolt Circle Diameter | 134.62 mm (5.300 inch) |
| Wheel Stud Quantity | 5 |
| Mounting Bolt Holes | 3 |
| ABS Sensor | Integrated |
| Number of Splines | 33 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01431
OE Numbers: 513229
Reference Numbers (Interchange):
SKF: BR930455
Timken: HA590254
NTN: WE61164
Vehicle Fitment
Dodge: Dakota 4-Wheel ABS (2005-2009)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Dodge Dakota 2005-2009 models with 4-Wheel ABS.
- Integrated ABS sensor provides reliable wheel speed signal for brake system operation.
- 33-spline axle interface ensures proper engagement with the drive shaft.
- 5-stud configuration with 139.70 mm bolt circle matches factory wheel fitment.
- 182.88 mm flange diameter and 78.74 mm pilot diameters deliver robust load capacity.
- Direct OE cross-reference to 513229 ensures accurate replacement.
Installation Notes
- Verify the 33-spline count matches your axle shaft before installation.
- Confirm 5-stud pattern with 139.70 mm bolt circle and 3-bolt mounting configuration.
- Check the ABS sensor connector type and wiring condition prior to fitting.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Dodge factory specifications.
- After installation, test ABS function at low speed to confirm no warning light appears.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
