Wheel Hub 513227
The 513227 wheel hub assembly from DUHUI Bearing provides a direct-fit replacement for the front or rear axle of select Volkswagen Phaeton and Audi A8, A6, and S6/S8 vehicles manufactured between 2002 and 2010. This complete hub assembly is designed for Non-ABS applications and is pre-assembled for simplified installation. This kit matches OE specifications including 713100510, and interchanges with industry-standard references such as Timken 513227, SKF BR930828, and Moog GRW81.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWH1429 |
| Part Number | 513227 |
| Product Type | Wheel Hub Assembly |
| Installation Location | Front / Rear Axle |
| Kit Contents | Hub × 1 |
| Hub Pilot Diameter | 91.40 mm (3.598 inch) |
| Hub Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Without sensor (Non-ABS) |
| Number of Splines | N/A |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DWH1429
OE Numbers:
713100510
Reference Numbers (Interchange):
Timken: 513227
SKF: BR930828
Moog: GRW81
Vehicle Fitment
VOLKSWAGEN PHAETON: 2004–2006
AUDI A6 (C6): 2005–2009
AUDI A6 QUATTRO: 2005–2009
AUDI A8 (4E, D3): 2002–2010
AUDI A8 QUATTRO: 2005–2009
AUDI S6 (C6): 2007–2008
AUDI S8 (D3): 2007–2009
All applications: Front/Rear Axle, Non-ABS. Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for VW Phaeton and Audi D3/C6 platform applications. Matches OE specification 713100510.
- Non-ABS configuration – designed for vehicles without ABS sensor.
- 4-bolt flange attachment provides secure installation.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
- Fully assembled kit – no additional components required for installation.
Installation Notes
- Verify your vehicle does NOT have ABS before installation. This hub is Non-ABS configuration.
- Before installation, compare the hub pilot diameter (91.40 mm) and bolt pattern against your original hub.
- Confirm the 4-bolt flange pattern matches your vehicle.
- Torque the hub mounting bolts and wheel nuts to Volkswagen Group specification.
- This hub fits both front and rear, driver and passenger sides. Sold individually.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies, center support bearings, and related components to OE specifications. Contact us
