Wheel Hub 513218
The DUHUI Bearing 513218 front right wheel hub is a direct OE-replacement assembly designed for Pontiac GTO models from 2004 through 2006. This front wheel hub bearing matches OE references including 513218, 92115771, 050952B, HA590006, and BR930372, and features an integrated ABS sensor with 3-bolt mounting configuration for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1420 |
| Part Number | 513218 |
| Position | Front Axle, Right |
| Flange Diameter | 139.70 mm (5.500 inch) |
| Bolt Circle Diameter | 116.84 mm (4.600 inch) |
| Wheel Pilot Diameter | 68.58 mm (2.700 inch) |
| Brake Pilot Diameter | 71.12 mm (2.800 inch) |
| Flange Offset | 30.48 mm (1.200 inch) |
| Hub Pilot Diameter | 76.20 mm (3.000 inch) |
| Hub Bolt Circle Diameter | 109.22 mm (4.300 inch) |
| Wheel Stud Quantity | 5 |
| Mounting Bolt Holes | 3 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1420
OE Numbers: 513218, 92115771, 050952B, HA590006, BR930372
Reference Numbers (Interchange):
SKF: BR930372
Timken: HA590006
NTN: WE61058
Vehicle Fitment
Pontiac: GTO (2004-2006)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front right wheel hub bearing engineered for Pontiac GTO 2004-2006 performance coupe applications.
- Integrated ABS sensor delivers wheel speed signals for brake system operation.
- 3-bolt mounting configuration provides secure attachment to the steering knuckle.
- 5-stud pattern with 116.84 mm bolt circle matches factory wheel fitment.
- 139.70 mm flange diameter with 68.58 mm wheel pilot ensures precise hub-centric fitment.
- Direct OE cross-reference to 513218, 92115771, 050952B, HA590006, and BR930372 ensures accurate replacement.
Installation Notes
- This hub is specified for right-side installation – confirm correct side before ordering.
- Confirm 3-bolt mounting configuration matches your vehicle.
- Check the ABS sensor connector type and wiring condition prior to fitting.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Pontiac factory specifications.
- After installation, test ABS function at low speed to confirm no warning light appears.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
