Wheel Hub 513176
The DUHUI Bearing 513176 front wheel hub is a direct OE-replacement assembly designed for Jeep Liberty and Dodge Nitro models from 2002 through 2009. This front wheel hub bearing matches OE reference 513176 and features an integrated ABS sensor with 27-spline axle configuration and 3-bolt triangular mounting for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1384 |
| Part Number | 513176 |
| Position | Front Axle |
| Flange Diameter | 152.40 mm (6.000 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 71.12 mm (2.800 inch) |
| Brake Pilot Diameter | 71.12 mm (2.800 inch) |
| Flange Offset | 53.34 mm (2.100 inch) |
| Hub Pilot Diameter | 93.98 mm (3.700 inch) |
| Hub Bolt Circle Diameter | 116.84 mm (4.600 inch) |
| Wheel Stud Quantity | 5 |
| Mounting Bolt Holes | 3 |
| Flange Shape | Triangular |
| ABS Sensor | Integrated |
| Number of Splines | 27 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1384
OE Numbers: 513176
Reference Numbers (Interchange):
SKF: BR930455
Timken: HA590254
NTN: WE61164
Vehicle Fitment
Jeep: Liberty (2002-2009)
Dodge: Nitro (2007-2009)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Jeep Liberty and Dodge Nitro SUV applications.
- Integrated ABS sensor delivers wheel speed signals for brake system operation.
- 27-spline axle interface ensures proper engagement with the drive shaft.
- 3-bolt triangular mounting configuration matches Chrysler original equipment design.
- 5-stud pattern with 114.30 mm bolt circle matches factory wheel fitment.
- 152.40 mm flange diameter with 71.12 mm pilot diameters delivers robust load capacity for SUV applications.
- Direct OE replacement matching 513176 specification.
Installation Notes
- Verify the 27-spline count matches your axle shaft before installation.
- Confirm 3-bolt triangular mounting configuration matches your vehicle.
- Check the ABS sensor connector type and wiring condition prior to fitting.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Jeep/Dodge factory specifications.
- After installation, test ABS function at low speed to confirm no warning light appears.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
