Wheel Hub 513158
The DUHUI Bearing 513158 front wheel hub is a direct OE-replacement assembly designed for Jeep Cherokee and Wrangler models with cast rotors from 1999 through 2006. This front wheel hub bearing matches OE references including 513158, 5016458, FW9158, BR930219, and HA597449, and features a 27-spline axle configuration with 3-bolt mounting for non-ABS applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1368 |
| Part Number | 513158 |
| Position | Front Axle |
| Flange Diameter | 153.42 mm (6.040 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 71.42 mm (2.812 inch) |
| Brake Pilot Diameter | 71.88 mm (2.830 inch) |
| Flange Offset | 48.39 mm (1.905 inch) |
| Hub Pilot Diameter | 100.13 mm (3.942 inch) |
| Hub Bolt Circle Diameter | 120.65 mm (4.750 inch) |
| Bolt Size | 1/2-20 |
| Wheel Stud Quantity | 5 |
| Mounting Bolt Hole Thread | M12 x 1.75 |
| Mounting Bolt Holes | 3 |
| Flange Shape | Triangular |
| ABS Sensor | Not Included |
| Number of Splines | 27 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1368
OE Numbers: 513158, 5016458, FW9158, BR930219, HA597449
Reference Numbers (Interchange):
SKF: BR930219
Timken: HA597449
NTN: WE61164
Vehicle Fitment
Jeep: Cherokee with Cast Rotor 1999-2001, Wrangler 2000-2006
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Jeep Cherokee and Wrangler off-road applications.
- 27-spline axle interface ensures proper engagement with the drive shaft.
- 3-bolt M12 x 1.75 mounting configuration with triangular flange shape matches Jeep original equipment design.
- 5-stud pattern with 114.30 mm bolt circle matches factory wheel fitment.
- 153.42 mm flange diameter with 71.42 mm wheel pilot ensures precise hub-centric fitment.
- 1/2-20 wheel stud specification matches original equipment.
- Designed for non-ABS applications with cast rotors – confirm your vehicle’s configuration before ordering.
- Direct OE cross-reference to 513158, 5016458, FW9158, BR930219, and HA597449 ensures accurate replacement.
Installation Notes
- Verify the 27-spline count matches your axle shaft before installation.
- Confirm 3-bolt mounting configuration with M12 x 1.75 threads matches your vehicle.
- This hub is specified for vehicles with cast rotors – verify your brake rotor type.
- This hub does not include an ABS sensor – verify your vehicle uses a non-ABS system.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Jeep factory specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
