Wheel Hub 513131
The DUHUI Bearing 513131 front wheel hub is a direct OE-replacement assembly designed for Mazda 929 and MPV RWD models from 1989 through 1998. This front wheel hub bearing matches OE references including 513131, H4313315XA, FW9131, and BR930041, and features an integrated ABS tone ring sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1357 |
| Part Number | 513131 |
| Position | Front Axle |
| Flange Diameter | 139.95 mm (5.510 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 67.06 mm (2.640 inch) |
| Brake Pilot Diameter | 71.88 mm (2.830 inch) |
| Flange Offset | 60.96 mm (2.400 inch) |
| Hub Pilot Diameter | 77.98 mm (3.070 inch) |
| Bolt Size | M12 x 1.5 |
| Wheel Stud Quantity | 5 |
| ABS Sensor | Integrated Tone Ring Sensor |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1357
OE Numbers: 513131, H4313315XA, FW9131, BR930041
Reference Numbers (Interchange):
SKF: BR930041
Timken: HA590254
NTN: WE61164
Vehicle Fitment
Mazda: 929 1992-1995, MPV RWD 1989-1998
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Mazda 929 sedan and MPV minivan RWD applications.
- Integrated ABS tone ring sensor provides wheel speed signals for brake system operation.
- 5-stud pattern with 114.30 mm bolt circle matches factory wheel fitment.
- 139.95 mm flange diameter with 67.06 mm wheel pilot ensures precise hub-centric fitment.
- M12 x 1.5 wheel stud specification matches original equipment.
- This hub is specified for RWD (Rear-Wheel Drive) models – verify your vehicle’s drivetrain configuration.
- Direct OE cross-reference to 513131, H4313315XA, FW9131, and BR930041 ensures accurate replacement.
Installation Notes
- Confirm 5-stud pattern with 114.30 mm bolt circle matches your vehicle.
- This hub is specified for RWD models – verify your vehicle’s drivetrain configuration.
- This hub features an ABS tone ring sensor – verify your vehicle uses this ABS type.
- Check the ABS sensor connector type and wiring condition prior to fitting.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Mazda factory specifications.
- After installation, test ABS function at low speed to confirm no warning light appears.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
