Wheel Hub 513117
The DUHUI Bearing 513117 front left wheel hub is a direct OE-replacement assembly designed for Chrysler Cirrus, Sebring, and Stratus models from 1994 through 2007. This front wheel hub bearing matches OE references including 513117, 050352B, FW9138, and BR930138, and features an integrated ABS sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01348 |
| Part Number | 513117 |
| Installation Position | Left |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Outer Diameter | 126.00 mm (4.961 inch) |
| Outer Diameter 2 | 120.00 mm (4.724 inch) |
| Width | 37.50 mm (1.476 inch) |
| Width 2 | 93.00 mm (3.661 inch) |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01348
OE Numbers: 513117, 050352B, FW9138, BR930138
Reference Numbers (Interchange):
SKF: BR930138
Timken: HA590254
NTN: WE61164
Vehicle Fitment
Chrysler: Cirrus 2.0 LX 1997-2000, Cirrus 2.5 LX 1994-2000, Sebring (JR) 2.7 V6 2001-2007, Sebring Convertible (JR) 2.7 V6 2001-2007, Stratus (JA) 2.5 V6 1995-2001
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front left wheel hub bearing engineered for Chrysler Cirrus, Sebring, and Stratus sedan and convertible applications.
- Integrated ABS sensor delivers wheel speed signals for brake system operation.
- 30 mm inner diameter and 126 mm outer diameter match Chrysler factory specifications.
- Precision-machined hub surface ensures proper rotor and wheel alignment.
- Direct OE cross-reference to 513117, 050352B, FW9138, and BR930138 ensures accurate replacement.
Installation Notes
- This hub is specified for left-side installation – confirm correct side before ordering.
- Verify 30 mm inner diameter matches your axle shaft dimensions.
- Check the ABS sensor connector type and wiring condition prior to fitting.
- Clean the steering knuckle mounting surface and inspect for wear or damage.
- Torque the hub retaining nut and wheel lug nuts to Chrysler factory specifications.
- After installation, test ABS function at low speed to confirm no warning light appears.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
