Wheel Hub 513109
The DUHUI Bearing 513109 wheel hub is a direct OE-replacement assembly designed for Dodge Dakota 4WD and Viper models from 1991 through 2009. This wheel hub bearing matches OE references including 513109, 4340315, FW9109, and BR930045, and features a 31-spline axle configuration with 6-stud mounting for non-ABS applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01345 |
| Part Number | 513109 |
| Position | Front/Rear Axle |
| Flange Diameter | 144.15 mm (5.675 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 71.50 mm (2.815 inch) |
| Brake Pilot Diameter | 73.15 mm (2.880 inch) |
| Flange Offset | 53.52 mm (2.107 inch) |
| Hub Pilot Diameter | 96.27 mm (3.790 inch) |
| Hub Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Bolt Size | 1/2-20 |
| Wheel Stud Quantity | 6 |
| Mounting Bolt Holes | 4 |
| Flange Shape | Rectangular |
| ABS Sensor | Not Included |
| Number of Splines | 31 |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01345
OE Numbers: 513109, 4340315, FW9109, BR930045
Reference Numbers (Interchange):
SKF: BR930045
Timken: HA590254
NTN: WE61164
Vehicle Fitment
Dodge: Dakota 4WD 1991-1996, Viper 1996-2006, Viper 2008-2009
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Wheel hub bearing engineered for Dodge Dakota 4WD truck and Viper sports car applications.
- Versatile design supports both front and rear axle installation.
- 31-spline axle interface ensures proper engagement with the drive shaft.
- 6-stud pattern with 114.30 mm bolt circle provides enhanced load capacity.
- 4-bolt mounting configuration with rectangular flange shape matches Dodge original equipment design.
- 144.15 mm flange diameter with 71.50 mm wheel pilot ensures precise hub-centric fitment.
- 1/2-20 wheel stud specification matches original equipment.
- Designed for non-ABS applications – confirm your vehicle’s ABS configuration before ordering.
- Direct OE cross-reference to 513109, 4340315, FW9109, and BR930045 ensures accurate replacement.
Installation Notes
- Verify the 31-spline count matches your axle shaft before installation.
- Confirm 4-bolt mounting configuration matches your vehicle.
- Confirm 6-stud pattern with 114.30 mm bolt circle matches your vehicle.
- This hub can be used on both front and rear axles – verify your specific application.
- This hub does not include an ABS sensor – verify your vehicle uses a non-ABS system.
- Clean the mounting surface thoroughly before installation.
- Torque the hub retaining nut and wheel lug nuts to Dodge factory specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
