Wheel Hub 512568
The DUHUI Bearing 512568 wheel hub is a direct OE-replacement assembly designed for Jeep Renegade, Compass, and Fiat 500X models. This rear wheel hub bearing matches OE references including 512568, 68246620AA, BR931004, and WE61958, and is engineered for rear axle applications on these compact SUV platforms. It serves as a reliable OEM replacement wheel hub for FWD and AWD configurations.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1767 |
| Part Number | 512568 |
| Position | Rear Axle |
| Design Type | Gen 3 |
| Outside Diameter | 84.00 mm (3.307 inch) |
| Flange Diameter | 135.10 mm (5.319 inch) |
| Flange Offset | 41.90 mm (1.650 inch) |
| Bolt Circle Diameter | 109.90 mm (4.327 inch) |
| Brake Pilot Diameter | 69.90 mm (2.752 inch) |
| Hub Pilot Diameter | 84.00 mm (3.307 inch) |
| Wheel Pilot Diameter | 65.00 mm (2.559 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.25 |
| Flange Bolt Hole Quantity | 4 |
| Number of Bolt Holes | 6 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1767
OE Numbers: 512568, 68246620AA, 68321351AA, BR931004, WE61958
Reference Numbers (Interchange):
SKF: BR931004
Timken: HA590619
NTN: WE61958
MOOG: 512568
Mevotech: MB25323
BCA: WE61958
GMB: 720-3270
Vehicle Fitment
Jeep: Renegade (2015-2021), Compass (2017-2022)
Fiat: 500X (2016-2018)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly with roll-form design provides consistent and optimal preload for rear axle applications.
- Non-integrated ABS design for vehicles where the wheel speed sensor is mounted separately from the hub assembly.
- 135.10 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Jeep Renegade, Compass, and Fiat 500X models.
- 5 wheel studs with M12 x 1.25 thread ensure proper wheel mounting and torque distribution.
- Premium quad-lip seal design ensures maximum protection from contamination.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
Installation Notes
- This hub is for rear axle applications on Jeep Renegade, Compass, and Fiat 500X models – verify position before ordering.
- Confirm the 5-stud flange pattern and 135.10 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench.
- Inspect the wheel speed sensor and wiring harness before installation, as this hub does not include an integrated sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
