Wheel Hub 512517
The DUHUI Bearing 512517 wheel hub is a direct OE-replacement assembly designed for Ford Mustang and GT models from 2015 onward. This rear wheel hub bearing matches OE references including 512517, FR3Z1104G, and WE61864, and is engineered for rear axle applications on the S550 platform. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1742 |
| Part Number | 512517 |
| Position | Rear Axle |
| Bearing Type | Ball Bearing |
| Flange Diameter | 145.80 mm (5.740 inch) |
| Flange Offset | 46.00 mm (1.811 inch) |
| Bolt Circle Diameter | 114.10 mm (4.492 inch) |
| Brake Pilot Diameter | 70.90 mm (2.791 inch) |
| Hub Pilot Diameter | 90.90 mm (3.579 inch) |
| Wheel Pilot Diameter | 70.40 mm (2.772 inch) |
| Spline Quantity | 32 |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M14 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1742
OE Numbers: 512517, FR3Z1104G, FR3Z1104B, 1411547799, WE61864, MB40317
Reference Numbers (Interchange):
SKF: BR930954
Timken: HA590597
MOOG: 512517
Mevotech: MB40317
BCA: WE61864
Dorman: 951-219
TRQ: BHA52011
Vehicle Fitment
Ford: Mustang (2015-2023), Mustang GT (2015-2023), GT (2017-2022)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Ball bearing design provides stable load distribution for rear axle applications on the Ford Mustang S550 platform.
- Integrated ABS sensor provides wheel speed signal directly from the hub assembly.
- 32-spline count ensures proper engagement with the axle shaft.
- 145.80 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Mustang and GT models.
- 5 wheel studs with M14 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
Installation Notes
- This hub is for rear axle applications on Ford Mustang and GT models – verify position before ordering.
- Confirm the 32-spline count on the axle shaft matches this hub before installation.
- Clean the knuckle mounting surface thoroughly before installation.
- Torque the axle nut to Ford factory specifications for the Mustang and GT – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
