Wheel Hub 512513
The DUHUI Bearing 512513 wheel hub is a direct OE-replacement assembly designed for Chrysler 200 models from 2015 through 2017. This rear wheel hub bearing matches OE references including 512513, 4779869AB, BR930899, and HA590585, and is engineered for rear axle applications on this mid-size sedan platform. It serves as a reliable OEM replacement wheel hub for FWD configurations.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1764 |
| Part Number | 512513 |
| Position | Rear Axle |
| Design Type | Gen 3 (Roll-Form Design) |
| Inside Diameter | 70.00 mm (2.756 inch) |
| Outside Diameter | 138.55 mm (5.455 inch) |
| Flange Diameter | 138.55 mm (5.455 inch) |
| Flange Offset | 53.50 mm (2.106 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Hub Pilot Diameter | 78.00 mm (3.071 inch) |
| Wheel Pilot Diameter | 65.00 mm (2.559 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1764
OE Numbers: 512513, 4779869AB, 4779869AC, MB25313, BR930899, HA590585, 04779869AC
Reference Numbers (Interchange):
SKF: BR930899
Timken: HA590585
NTN: WE61818
MOOG: 512513
Mevotech: MB25313
BCA: WE61818
GMB: 730-0361
Vehicle Fitment
Chrysler: 200 (2015-2017)
Dodge: Dart (2013-2016)
Jeep: Cherokee (2014-2023)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly with roll-form design provides consistent and optimal preload for rear axle applications.
- Non-integrated ABS design for vehicles where the wheel speed sensor is mounted separately from the hub assembly.
- 138.55 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Chrysler 200 models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, and MOOG part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Chrysler 200 models – verify position before ordering.
- Confirm the 5-stud flange pattern and 138.55 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Chrysler factory specifications for the 200 – do not use an impact wrench.
- Inspect the wheel speed sensor and wiring harness before installation, as this hub does not include an integrated sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
