Wheel Hub 512501
The DUHUI Bearing 512501 rear wheel hub is a direct OE-replacement assembly designed for Honda CR-V III (RE_) and CR-V IV (RM_) models from 2007 onward. This rear wheel hub bearing matches OE references including 512501, MB60310, 42200-T0A-951, DLG590461, HA590461, and BR930909, and features a Gen 3 design with 5-stud configuration for rear axle applications.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1759 |
| Part Number | 512501 |
| Position | Rear Axle |
| Outside Diameter | 151.80 mm (5.976 inch) |
| Inside Diameter | 64.10 mm (2.524 inch) |
| Number of Bolt Holes | 5 |
| Flange Bolt Hole Quantity | 4 |
| Design Type | Gen 3 |
| Pre-Greased | Yes |
| ABS Sensor | Non-Integral |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1759
OE Numbers: 512501, MB60310, 42200-T0A-951, DLG590461, HA590461, BR930909
Reference Numbers (Interchange):
SKF: BR930909
Timken: HA590461
NTN: WE61058
Vehicle Fitment
Honda: CR-V III (RE_) 2.2 i-DTEC 4WD (RE6) 2007, CR-V IV (RM_) 1.6 i-DTEC 4WD (RE6) 2015+, CR-V IV (RM_) 2.0 i-VTEC (RE5, RM1) 2012+, CR-V IV (RM_) 2.4 (RM3) 2012+, CR-V IV (RM_) 2.4 AWD (RM4) 2012+
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear axle wheel hub bearing engineered for Honda CR-V III and CR-V IV SUV applications.
- Gen 3 design provides improved structural integrity and durability.
- 5-stud pattern matches factory wheel fitment.
- 151.80 mm outside diameter with 64.10 mm inside diameter matches factory specifications.
- 4-bolt mounting flange provides secure attachment to the rear axle carrier.
- Pre-greased and sealed – ready for installation with no additional lubrication required.
- Designed for non-integral ABS sensor – confirm your vehicle’s ABS configuration before ordering.
- Direct OE cross-reference to 512501, MB60310, 42200-T0A-951, DLG590461, HA590461, and BR930909 ensures accurate replacement.
Installation Notes
- This hub is specified for rear axle installation – confirm your application.
- Confirm 5-stud pattern matches your vehicle.
- This hub requires a separate ABS sensor (non-integral) – verify your vehicle’s sensor configuration.
- Clean the mounting surface thoroughly before installation.
- Torque the hub retaining nut and wheel lug nuts to Honda factory specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
